PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16" Barb

• For use with non water retraction
• 1/16" barbs or 1/8" barbs
• Allows flow in 1 direction only

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 2201
O-Ring, Buna-n, .056 I.D. X .060 Width, -003; Pkg of 12

O-Ring, Buna-n, .056 I.D. X .060 Width, -003

• Material - Buna-n
• I.D. x Cross Section - .056 x .060
• Package of 12

PN 0077
1/16" In-line Barb; Pkg of 10

1/16" Plated In-Line Metal Barb

• Package of 10

PN 0072
10-32 Washer, Plastic; Pkg of 100

10-32 Plastic Washers

• Package of 100

PN 0071
1/8" Clamp Sleeve; Pkg of 10

1/8" Clamp Sleeve

• For use with 1/8" O.D. tubing
• Package of 10

PN 0082
1/16" Barb Tee, Plastic; Pkg of 10

1/16" Barb Tee White Plastic

• For use with 1/8" O.D. tubing
• Package of 10

PN 0078
1/8" In-line Barb; Pkg of 10

1/8" Plated In-line Barb

• Package of 10 

PN 0070
1/4" Clamp Sleeve; Pkg of 10

1/4" Clamp Sleeve

• For use with 1/4" O.D. tubing
• Package of 10

PN 2230
O-Ring, Buna-n, .042 X .050 Width, -002; Pkg of 12

O-Ring 11-002, Buna-n, .042 X .050 Width

• Material - Buna-n
• I.D. x Cross Section - .042 x .050
• Package of 12
• (A-dec® #030.002.00)

PN 7080
Air Electric Switch, 25 PSI, Normally Open

Air Electric Switch, 25 PSI, Normally Open (A-dec® #044.181.00) 

• Activated at 25 PSI, 5 A
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 9001
Diaphragm Sheet, 11" x 8-1/2"

Diaphragm Sheet, 11" x 8-1/2"

• 11" x 8.5" Sheet
• .013" Thick

PN 0075
1/8" Barb, Washer and Sleeve Kit; Pkg of 10

1/8" Barb Fitting Plated

• 10-32 x 1/8" Barb
• For use with 1/4" O.D. tubing
• Includes sleeve & washer
• Package of 10

PN 0074
1/16" Barb, Washer and Sleeve kit; Pkg of 10

1/16" Barb Fitting Plated

• 10-32 x 1/16" Barb (pkg of 10)
• For 1/8" O.D. tubing
• Includes sleeve & washer

PN 2240
O-Ring, Buna-n, 2.114 I.D. X .070 Width, -034; Pkg of 12

Vacuum Canister, Bottom & Side Mount

• O-Ring Seal for Cap (pkg of 12)
• Available in either side or bottom port
• Solids collector w/ removable screen
• Accepts 2 HVE & 1 SE
• Uses 2 1/8" screens 5817, 5889, 5887
• Mounts using four 6-32 screws on bottom surface (included)
• 5872 & 5873 include mounting bracket 5877
• 5/8" O.D. Drain