PN 5754
Saliva Ejector Tip Push-on Autoclavable, Gray

Push On Tip to fit A-dec® Saliva Ejectors, Gray Tip, (A-dec® #12.0183.01)

• Push-on Autoclavable, Gray
• Push-on or screw-on
• Tips are autoclavable
• Latex-free

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 0077
1/16" In-line Barb; Pkg of 10

1/16" Plated In-Line Metal Barb

• Package of 10

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 0082
1/16" Barb Tee, Plastic; Pkg of 10

1/16" Barb Tee White Plastic

• For use with 1/8" O.D. tubing
• Package of 10

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Rear Port Micro Valve, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 0083
1/8" Barb Tee, Plastic; Pkg of 10

1/8" Barb Tee White Plastic

• For use with 1/4" O.D. tubing
• Package of 10

PN 8031
Lubricant, Parker Silicone, 2 oz

Lubricant, Parker Silicone, 2 oz

• Moisture resistant
• Silicone based lubricant
• For synthetic and rubber based O-rings

PN 7021
Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 0952
1/16" Cross Connector, Metal

1/8" Cross Metal

• For use with 1/8" O.D. tubing
• Nickel plated

PN 2210
O-Ring, Buna-n, .364 I.D. X .070 Width, -012; Pkg of 12

Piston O-Ring (pack of 12)

• O-Ring, Buna-n, .364 I.D. X .070 Width, -012
• Material - Buna-n
• I.D. x Cross Section - .364 x .070
• Package of 12

PN 2236
O-Ring, Buna-n, .614 I.D. X .070 Width, -016; Pkg of 12

O-Ring, Buna-n, .614 I.D. X .070 Width, -016

• Material - Buna-n
• I.D. x Cross Section - .614 x .070
• Package of 12

PN 9700
Ball Driver, 3/32"

Ball Driver, 3/32"

• Use for adjusting syringe flow and handpiece pressure
• Plastic handle