PN 5754
Saliva Ejector Tip Push-on Autoclavable, Gray

Push On Tip to fit A-dec® Saliva Ejectors, Gray Tip, (A-dec® #12.0183.01)

• Push-on Autoclavable, Gray
• Push-on or screw-on
• Tips are autoclavable
• Latex-free

PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16" Barb

• For use with non water retraction
• 1/16" barbs or 1/8" barbs
• Allows flow in 1 direction only

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 7052
Needle Valve w/Knob, Gray

Needle Valve W/Knob, Gray

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut
• Includes 1/16" hex allen wrench

PN 0077
1/16" In-line Barb; Pkg of 10

1/16" Plated In-Line Metal Barb

• Package of 10

PN 0072
10-32 Washer, Plastic; Pkg of 100

10-32 Plastic Washers

• Package of 100

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 0124
5-Hole HP Gasket

Autoclavable HP Gasket - 5 Hole Midwest

PN 0071
1/8" Clamp Sleeve; Pkg of 10

1/8" Clamp Sleeve

• For use with 1/8" O.D. tubing
• Package of 10

PN 0064
10-32 Cross Connector, Female

10-32 Female Cross 4-Way

• Package of 1

PN 7016
Toggle Valve, On/Off, 3-Way, Gray

Toggle Valve Hex Body, On/Off, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 0082
1/16" Barb Tee, Plastic; Pkg of 10

1/16" Barb Tee White Plastic

• For use with 1/8" O.D. tubing
• Package of 10

PN 0078
1/8" In-line Barb; Pkg of 10

1/8" Plated In-line Barb

• Package of 10 

PN 0070
1/4" Clamp Sleeve; Pkg of 10

1/4" Clamp Sleeve

• For use with 1/4" O.D. tubing
• Package of 10

PN 7080
Air Electric Switch, 25 PSI, Normally Open

Air Electric Switch, 25 PSI, Normally Open (A-dec® #044.181.00) 

• Activated at 25 PSI, 5 A
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.