PN 7070
Air Pilot Valve, 2-Way, Normally Closed

Air Pilot Valve, 2-Way, Normally Closed

• For air and water
• Barb fitting for 1/8 O.D. tubing
• Air actuated on/off control
• Panel-mount 15/32-32 thread with nut
• Requires 25 PSI

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal
• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 0198
1/8" Clamp Sleeve; Pkg of 100

1/8" Plastic Clamp Sleeve

• For use with 1/8" O.D. tubing
• Package of 100

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 0954
4-HOLE TUBING CONNECTOR

4 Hole Tubing Splice Connector

PN 0021
1/4" Poly Nut & Sleeve; Pkg of 5

1/4" Poly Nut & Sleeve

• Package of 5

PN 7078
Valve Mounting Bracket, Single

Valve Mounting Bracket, Single

• 1/2" I.D. mounting holes
• White powder coat finish
• Mounts toggles, indicators, Q.D.'s and air electric switches
• Single Mount, L: 1 1/2" H: 7/8" W: 3/4"

PN 2254
O-Ring, Viton, .426 I.D. X .070 Width, -013; Pkg of 12

O-Ring, Viton, .426 I.D. X .070 Width, -013

• Material - Viton
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 0197
1/4" Clamp Sleeve; Pkg of 100

1/4" Plastic Clamp Sleeve

• For use with 1/4" O.D. tubing
• Package of 25

PN 2203
O-Ring, Buna-n, .114 I.D. X .070 Width, -006; Pkg of 12

O-Ring 11-006, Buna-n, .114 I.D. X .070 Width,

• Material - Buna-n
• I.D. x Cross Section - .114 x .070
• Package of 12
• (A-dec® #030.006.02)

PN 0083
1/8" Barb Tee, Plastic; Pkg of 10

1/8" Barb Tee White Plastic

• For use with 1/4" O.D. tubing
• Package of 10

PN 8031
Lubricant, Parker Silicone, 2 oz

Lubricant, Parker Silicone, 2 oz

• Moisture resistant
• Silicone based lubricant
• For synthetic and rubber based O-rings

PN 7021
Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 2243
O-Ring, Viton, .489 I.D. X .070 Width, -014; Pkg of 12

O-Ring, Viton, .489 I.D. X .070 Width, -014

• Material - Viton
• I.D. x Cross Section - .489 x .070
• Package of 12

PN 8651
Blow Gun w/10' Coil Tubing

Blow Gun w/10' Coil Tubing

• 125 PSI working pressure
• Lever operated
• 1/4 FPT connection
• Available with 10' coiled tubing (yellow) with 1/4 MPT fittings

PN 0188
10-32 x 1/8", Barb; Pkg of 100

1/8" Barb Only

• For use with 1/4" O.D. tubing
• Includes sleeve & washer
• Package of 100

PN 7026
Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 8067
O-Ring Kit

O-Ring Kit

• The kit contains 30 different O-rings in packages of 12 each, totaling 360 O-rings
• The O-rings come conveniently packaged in a 24 compartment plastic storage box
• Includes: 2207, 2210, 2215, 2223, 2228, 2235, 2236, 2237, 2238, 2239, 2240, 2241, 2243, 2245

PN 2205
O-Ring, Buna-n, .176 I.D. X .070 Width, -008; Pkg of 12

O-Ring, Buna-n, .176 I.D. X .070 Width, -008

• Material - Buna-n
• I.D. x Cross Section - .176 x .070
• Package of 12

PN 2225
O-Ring, Buna-n, .029 I.D. X .040 Width, -001; Pkg of 12

O-Ring, Buna-n, .029 I.D. X .040 Width, -001

• Material - Buna-n
• I.D. x Cross Section - .029 x .040
• Package of 12
• (A-dec® #030.001.00)

PN 7089
Air Electric Switch, 10 PSI, Normally Closed

Air Electric Switch, 10 PSI, Normally Closed (A-dec® #044.159.00) 

• Activated at 10 PSI or 25 PSI
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5620
Valve Cleaning HVE Brush; Pkg of 5

Valve Cleaning Brush

• Package of 5 
• 3 3/4" bristles

PN 2256
O-Ring, Viton, .239 I.D. X .070 Width, -010; Pkg of 12

O-Ring, Viton, .239 I.D. X .070 Width, -010

• Material - Viton
• I.D. x Cross Section - .239 x .070
• Package of 12

PN 2257
O-Ring, Viton, .364 I.D. X .070 Width, -012; Pkg of 12

O-Ring, Viton, .364 I.D. X .070 Width, -012

• Material - Viton
• I.D. x Cross Section - .364 x .070
• Package of 12

PN 0189
10-32 Hex Plug; Pkg of 100

10-32 Hex Plug Only

• Package of 100
• Includes washer

PN 8620
Tubing Cutter

Tubing Cutter

PN 2210
O-Ring, Buna-n, .364 I.D. X .070 Width, -012; Pkg of 12

Piston O-Ring (pack of 12)

• O-Ring, Buna-n, .364 I.D. X .070 Width, -012
• Material - Buna-n
• I.D. x Cross Section - .364 x .070
• Package of 12

PN 2207
O-Ring, Buna-n, .426 I.D. X .070 Width, -013; Pkg of 12

Body O-Ring, Buna-n, .426 I.D. X .070 Width, -013

• Material - Buna-n
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 8060
Sleeve Tool, Plastic, 1/8" & 1/4"

Sleeve Tool, Plastic, 1/8" & 1/4"

• For 1/8" and 1/16" sleeves
• For 1/8" ID uni-clamp
• Durable plastic

PN 0023
1/4" Poly Sleeve; Pkg of 10

1/4" Poly Sleeve "Ferrule"

• Package of 10