PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16" Barb

• For use with non water retraction
• 1/16" barbs or 1/8" barbs
• Allows flow in 1 direction only

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 7052
Needle Valve w/Knob, Gray

Needle Valve W/Knob, Gray

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut
• Includes 1/16" hex allen wrench

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 7016
Toggle Valve, On/Off, 3-Way, Gray

Toggle Valve Hex Body, On/Off, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 7080
Air Electric Switch, 25 PSI, Normally Open

Air Electric Switch, 25 PSI, Normally Open (A-dec® #044.181.00) 

• Activated at 25 PSI, 5 A
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7212
Integrated Master Shut-Off Valve w/Regulator & Filter

Integrated Master Shut-Off Valve w/Regulator & FilterIntegrated Shut-Off Valve

• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Rear Port Micro Valve, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 7070
Air Pilot Valve, 2-Way, Normally Closed

Air Pilot Valve, 2-Way, Normally Closed

• For air and water
• Barb fitting for 1/8 O.D. tubing
• Air actuated on/off control
• Panel-mount 15/32-32 thread with nut
• Requires 25 PSI

PN 7250
In-Line Filter, 1/8" FPT

In-Line Filter, 1/8" FPT

• 35 micron filtration
• 1" diameter by 1" long
• Air or water

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 3021
Syringe Flow Control Block

Syringe Block

• For use on DCI 4102 & other manual handpiece control systems
• Includes all barb fittings
• Handpiece pressure adjustment

PN 7078
Valve Mounting Bracket, Single

Valve Mounting Bracket, Single

• 1/2" I.D. mounting holes
• White powder coat finish
• Mounts toggles, indicators, Q.D.'s and air electric switches
• Single Mount, L: 1 1/2" H: 7/8" W: 3/4"

PN 7285
Air On/Off Indicator, Green

Replacement A-dec® Pneumatic Indicator, Green Panel Mount On / Off Indicator(A-dec® #24.0100.03)

• 10-32 Port with barbs for 1/8" and 1/16" I.D. tubing
• 25-120 PSI
• Panel-mount

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing