PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 7052
Needle Valve w/Knob, Gray

Needle Valve W/Knob, Gray

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut
• Includes 1/16" hex allen wrench

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 7016
Toggle Valve, On/Off, 3-Way, Gray

Toggle Valve Hex Body, On/Off, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 7203
Mini Regulator, 10-32 Input, Non-Relieving

Mini Regulator

• 10-32 Input, Non-Relieving
• 150 PSI maximum
• Piston type
• Non-relieving
• Mounting hardware 15/32-32 thread with nut
• Water or air
• Turn clockwise to increase pressure

PN 7080
Air Electric Switch, 25 PSI, Normally Open

Air Electric Switch, 25 PSI, Normally Open (A-dec® #044.181.00) 

• Activated at 25 PSI, 5 A
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5947
Holder Valve, Auto HP, Normally Open, Side Port

Holder Valve, Auto HP, Normally Open, Side Port

• Normally open is used for positive air signal
• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 7070
Air Pilot Valve, 2-Way, Normally Closed

Air Pilot Valve, 2-Way, Normally Closed

• For air and water
• Barb fitting for 1/8 O.D. tubing
• Air actuated on/off control
• Panel-mount 15/32-32 thread with nut
• Requires 25 PSI

PN 7250
In-Line Filter, 1/8" FPT

In-Line Filter, 1/8" FPT

• 35 micron filtration
• 1" diameter by 1" long
• Air or water

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 3021
Syringe Flow Control Block

Syringe Block

• For use on DCI 4102 & other manual handpiece control systems
• Includes all barb fittings
• Handpiece pressure adjustment

PN 7078
Valve Mounting Bracket, Single

Valve Mounting Bracket, Single

• 1/2" I.D. mounting holes
• White powder coat finish
• Mounts toggles, indicators, Q.D.'s and air electric switches
• Single Mount, L: 1 1/2" H: 7/8" W: 3/4"

PN 7285
Air On/Off Indicator, Green

Replacement A-dec® Pneumatic Indicator, Green Panel Mount On / Off Indicator(A-dec® #24.0100.03)

• 10-32 Port with barbs for 1/8" and 1/16" I.D. tubing
• 25-120 PSI
• Panel-mount

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"