PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 7203
Mini Regulator, 10-32 Input, Non-Relieving

Mini Regulator

• 10-32 Input, Non-Relieving
• 150 PSI maximum
• Piston type
• Non-relieving
• Mounting hardware 15/32-32 thread with nut
• Water or air
• Turn clockwise to increase pressure

PN 7212
Integrated Master Shut-Off Valve w/Regulator & Filter

Integrated Master Shut-Off Valve w/Regulator & FilterIntegrated Shut-Off Valve

• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

PN 5983
Holder Valve, Auto HP, Normally Closed, Rear Port

Rear Port Micro Valve, Normally Closed

• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 9188
Single Shut Off Valve Assembly & Filter, Water

Water Single Shut-Off Valve Assembly & Filter

• Water Single Shut-Off Valve Assembly & Filter
• For water
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 7133
Water Relay Combo Valve Repair Kit

Water Relay & Flow Control Combo Valves, Old Style, Repair kit for 7130 Valve

• Old Style, Repair kit for 7130 Valve
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

PN 7321
HP Muffler and Oil Collector

HP Muffler and Oil Collector

• Can be mounted through frame for removal from outside control head
• Will handle up to four handpieces
• Minimum back pressure
• Compact size to fit inside control head
• Filter media is standard cotton swab material

PN 7247
Filter Element, 40 Micron

Filter Element, 40 Micron

• (A-dec® #24.0234.00)
• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7270
Rectangular Air Gauge

Replacement A-dec® Rectangular Pressure Gauge 0-60 PSI (A-dec® #026.083.01)

• 0-60 PSI reading
• For air only
• 1/2" H x 1-3/4" W
• Vibration & shock resistant

   

PN 7021
Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 7260
Round Pressure Gauge, 0-160 PSI

Pressure Gauge 1 1/2" Face

• Rear Mounted Pressure Gauge
• 0-160 PSI pressure reading
• For air or water
• 1 1/2" diameter
• 1/8" MPT thread / 10-32 Female