PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 0954
4-HOLE TUBING CONNECTOR

4 Hole Tubing Splice Connector

PN 0021
1/4" Poly Nut & Sleeve; Pkg of 5

1/4" Poly Nut & Sleeve

• Package of 5

PN 7078
Valve Mounting Bracket, Single

Valve Mounting Bracket, Single

• 1/2" I.D. mounting holes
• White powder coat finish
• Mounts toggles, indicators, Q.D.'s and air electric switches
• Single Mount, L: 1 1/2" H: 7/8" W: 3/4"

PN 2254
O-Ring, Viton, .426 I.D. X .070 Width, -013; Pkg of 12

O-Ring, Viton, .426 I.D. X .070 Width, -013

• Material - Viton
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 0075
1/8" Barb, Washer and Sleeve Kit; Pkg of 10

1/8" Barb Fitting Plated

• 10-32 x 1/8" Barb
• For use with 1/4" O.D. tubing
• Includes sleeve & washer
• Package of 10

PN 0197
1/4" Clamp Sleeve; Pkg of 100

1/4" Plastic Clamp Sleeve

• For use with 1/4" O.D. tubing
• Package of 25

PN 0074
1/16" Barb, Washer and Sleeve kit; Pkg of 10

1/16" Barb Fitting Plated

• 10-32 x 1/16" Barb (pkg of 10)
• For 1/8" O.D. tubing
• Includes sleeve & washer

PN 8034
Lubricant, Silicone, .04 oz; Pkg of 5

Lubricant, Silicone, .04 oz(A-dec® #98.0090.00)

• Moisture resistant
• Silicone based lubricant
• For synthetic and rubber based O-rings

PN 2240
O-Ring, Buna-n, 2.114 I.D. X .070 Width, -034; Pkg of 12

Vacuum Canister, Bottom & Side Mount

• O-Ring Seal for Cap (pkg of 12)
• Available in either side or bottom port
• Solids collector w/ removable screen
• Accepts 2 HVE & 1 SE
• Uses 2 1/8" screens 5817, 5889, 5887
• Mounts using four 6-32 screws on bottom surface (included)
• 5872 & 5873 include mounting bracket 5877
• 5/8" O.D. Drain

PN 2203
O-Ring, Buna-n, .114 I.D. X .070 Width, -006; Pkg of 12

O-Ring 11-006, Buna-n, .114 I.D. X .070 Width,

• Material - Buna-n
• I.D. x Cross Section - .114 x .070
• Package of 12
• (A-dec® #030.006.02)

PN 7087
Air Electric Switch, 25 PSI, Normally Closed

Air Electric Switch, 25 PSI, Normally Closed

• Activated at 10 PSI or 25 PSI
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

PN 2434
Mouth Props, Child; Box of 2

Mouth Props, Child (MDT #3-71-0982-20)

• Rubber over brass construction
• Not made with natural rubber latex
• Autoclavable
• Package of 2

PN 7109
X-Ray Exposure Switch, 3/4 Amp, 125 Volt, Universal

X-Ray Exposure Switch, 3/4 Amp, 125 Volt, Universal

• Push button normally open
• Screw terminals
• SPST
• 3/4 amp 125V AC/DC

PN 0083
1/8" Barb Tee, Plastic; Pkg of 10

1/8" Barb Tee White Plastic

• For use with 1/4" O.D. tubing
• Package of 10

PN 8031
Lubricant, Parker Silicone, 2 oz

Lubricant, Parker Silicone, 2 oz

• Moisture resistant
• Silicone based lubricant
• For synthetic and rubber based O-rings

PN 2309
O-RING .206 X .103 VITON BROWN (PKG 12)

O-RING .206 X .103 VITON BROWN (PKG 12)

PN 2305
O-Ring, Viton, .056 I.D. x .060 Width; Pkg of 12

O-Ring, Viton, .056 I.D. x .060 Width(A-dec® #034.003.00)

• For use on DCI Autoclavable Syringe
• Material - Viton
• I.D. x Cross Section - .056 x .060
• Package of 12

PN 7021
Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 2243
O-Ring, Viton, .489 I.D. X .070 Width, -014; Pkg of 12

O-Ring, Viton, .489 I.D. X .070 Width, -014

• Material - Viton
• I.D. x Cross Section - .489 x .070
• Package of 12

PN 2253
O-Ring, Viton, .447 I.D. X .052 Width; Pkg of 12

O-Ring, Viton, .447 I.D. X .052 Width

• Material - Viton
• I.D. x Cross Section - .447 x .052
• Package of 12

PN 8621
Tubing Stripper

Tubing Stripper

PN 2212
O-Ring, Buna-n, .180 I.D. X .040 Width; Pkg of 12

O-Ring, Buna-n, .180 I.D. X .040 Width

• Material - Buna-n
• I.D. x Cross Section - .180 x .040
• Package of 12

PN 2211
O-Ring, Buna-n, .070 I.D. X .040 Width; Pkg of 12

O-Ring, Buna-n, .070 I.D. X .040 Width

• Material - Buna-n
• I.D. x Cross Section - .070 x .040
• Package of 12

PN 7124
Toggle Only, Detented w/Pin, Gray

Toggle Only, Detented w/Pin, Gray

• On/Off Toggle w/ Pin

PN 2255
O-Ring, Buna-n, .053 I.D. X .064 Width; Pkg of 12

O-Ring, Buna-n, .053 I.D. X .064 Width

• Material - Buna-n
• I.D. x Cross Section - .053 x .064
• Package of 12

PN 8651
Blow Gun w/10' Coil Tubing

Blow Gun w/10' Coil Tubing

• 125 PSI working pressure
• Lever operated
• 1/4 FPT connection
• Available with 10' coiled tubing (yellow) with 1/4 MPT fittings

PN 9279
Extension Cord, Electrical, 15'

Extension Cord, Electrical, 15'

PN 7267
Handpiece Pressure Test Gauge, 0-100 PSI

Handpiece Pressure Test Gauge, 0-100 PSI

• Measures drive air pressure w/ handpiece running
• 0-100 PSI gauge
• Fits both 6 pin & 5 hole handpieces

PN 2221
O-Ring, Buna-n, 1.86 I.D. X .070 Width; Pkg of 12

Vacuum Canister, Bracket Mounted

• O-Ring Seal for Cap (pkg of 12)
• Used w/ central vacuum system
• Solids collector w/ removable screen
• Accepts 2 HVE & 1 SE
• Hydrocolloid drain provision
• 1/2" O.D. drain
• Uses 1 7/8" screens 5818, 5820, 5832

PN 8110
Low Voltage Electrical Cable

Low Voltage Electrical Cable

• 8-conductor wire (priced per foot)
• 22 Gauge wires

PN 5989
Holder Valve, Auto HP, Normally Open, Rear Port

Holder Valve, Auto HP, Normally Open, Rear Port

• 5948 normally closed is used for 5940, 5960 & 4592 handpiece holders
• 5983 normally closed is used for 4561
• 5947 normally open is used for positive air signal

PN 8089
Sleeve Tool, Metal, 1/8" & 1/4"

Sleeve Tool, Metal, 1/8" & 1/4"

• Plated metal construction
• Ends angled 90 degrees

PN 9325
Hemostat

Hemostat

PN 2298
O-Ring, Ethylene Propylene, .206 I.D. X .103 Width; Pkg of 12

O-Ring, Ethylene Propylene, .206 I.D. X .103

• Material - Ethylene Propylene
• I.D. x Cross Section - .206 x .103
• Package of 12 

PN 0188
10-32 x 1/8", Barb; Pkg of 100

1/8" Barb Only

• For use with 1/4" O.D. tubing
• Includes sleeve & washer
• Package of 100

PN 7026
Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 8111
Hospital Grade Plug, Straight, Male

Hospital Grade Plug, Straight, Male

PN 6807
Drawer Push Latch w/Screws

Drawer Push Latch w/Screws

PN 8112
Hospital Grade Plug, Right Angle, Male

Hospital Grade Plug, Right Angle, Male

• Hospital grade
• 115 volt AC / 20 amp
• Right angle

PN 8067
O-Ring Kit

O-Ring Kit

• The kit contains 30 different O-rings in packages of 12 each, totaling 360 O-rings
• The O-rings come conveniently packaged in a 24 compartment plastic storage box
• Includes: 2207, 2210, 2215, 2223, 2228, 2235, 2236, 2237, 2238, 2239, 2240, 2241, 2243, 2245

PN 8781
Technician Fittings Kit

Technician Fittings Kit Kit includes:

• PN 8885 12 Compartment Storage Box, 1 ea.
• PN 0072 10-32 Plastic Washers, 100 ea.
• PN 0077 1/16" Plated In-Line Metal Barb, 10 ea.
• PN 0078 1/8" Plated In-Line Barb, 10 ea.
• PN 0198 1/8" Plastic Clamp Sleeve, 100 ea.
• PN 0197 1/4" Plastic Clamp Sleeve, 25 ea.
• PN 0064 10-32 Female Cross, 10 ea.
• PN 0065 10-32 Female Tee, 10 ea.
• PN 0189 10-32 Plug, 50 ea.
• PN 0187 10-32 1/16" Metal Barb, 50 ea.
• PN 0188 10-32 1/8" Metal Tee, 50 ea.
• PN 0951 1/16" Metal Tee, 20 ea.
• PN 0952 1/16" Metal Cross, 20 ea.

PN 7134
Low Profile Stainless X-Ray Switch Plate Assy

Low Profile Stainless X-Ray Switch Plate Assy

• Recessed button prevents accidental exposure
• Stainless design 

PN 2225
O-Ring, Buna-n, .029 I.D. X .040 Width, -001; Pkg of 12

O-Ring, Buna-n, .029 I.D. X .040 Width, -001

• Material - Buna-n
• I.D. x Cross Section - .029 x .040
• Package of 12
• (A-dec® #030.001.00)

PN 2205
O-Ring, Buna-n, .176 I.D. X .070 Width, -008; Pkg of 12

O-Ring, Buna-n, .176 I.D. X .070 Width, -008

• Material - Buna-n
• I.D. x Cross Section - .176 x .070
• Package of 12

PN 8063
Air Service Tool

Air Service Tool

• Provides air for cleaning tubing or testing components
• 4-hole Midwest connector