PN 5754
Saliva Ejector Tip Push-on Autoclavable, Gray

Push On Tip to fit A-dec® Saliva Ejectors, Gray Tip, (A-dec® #12.0183.01)

• Push-on Autoclavable, Gray
• Push-on or screw-on
• Tips are autoclavable
• Latex-free

PN 3085
Syringe Button w/Spring, Quick Clean

Quick-Clean Syringe Button Cartridge & Conical Spring

• For Quick-Clean Standard Style Syringes
• For Quick-Clean Euro-Style Syringes
• Fits standard style syringe

PN 3430
Syringe, Standard, Quick-Clean, Less Tubing & Kit

Syringe, Standard, Quick Clean, Less Tubing & Kit

• Smooth contours for quick, thorough cleaning
• Quick-Change® tip disconnect
• Uses standard autoclavable tips or disposable tips
• Asepsis tubing standard
• Includes service kit when purchased w/ tubing

PN 742
Vacuum Tubing, 1/2" I.D., Smooth Asepsis Sterling

Vacuum Tubing, 1/2" I.D., Smooth Asepsis Sterling

• Priced per foot
• Smooth, inside and outside
• Geometric cross-section resists crimping or collapsing
• Extruded vinyl
• Compatible with cleaning and disinfecting solutions
• Fits standard HVE valves

PN 5670
Economy Autoclavable Saliva Ejector Lever

Economy Autoclavable Valves

• Replacement Lever
• Anodized aluminum body
• Quick disconnect – 360° swivel
• Smooth plastic lever action
• Includes brush for cleaning

PN 0011
1/4" Poly Q.D. Panel Mount w/ Shut-off, Female

Poly Q.D. Female Panel Mount w/ Shut-off

• 1/4" Coupler w/ shut-off
• Includes both Yellow & Blue Indicators

PN 731
Vacuum Tubing, 1/2" I.D., Asepsis Gray

Vacuum Tubing, 1/2" I.D., Asepsis Gray

• Priced per foot

PN 7139
Water Relay, Combo Valve w/Gray Knob

Water Relay w/ Flow Control Combo Valves

• Water Relay w/ Flow Control
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 7140
Check Valve w/Ball, 1/16" Barb

Check Valve w/Ball 1/16" Barb

• For use with non water retraction
• 1/16" barbs or 1/8" barbs
• Allows flow in 1 direction only

PN 8136
Washer for Water Bottle Cap

Washer for Water Bottle Cap• .720 ID x 1.063 OD

PN 7350
Water Relay, Retracting, Standard

Water Relay, Retracting, Standard

• Activates at 20 PSI

PN 5171
Economy Autoclavable Extended Vacuum Valve Lever

Economy Autoclavable Valves

• Replacement Lever
• Single piece anodized aluminum body
• Smooth plastic lever action
• Quick disconnect - 360 degree swivel
• Includes brush for cleaning

PN 8128
750 ml Plastic Bottle w/Cap & Pick-Up Tube

750 ml Plastic Bottle w/Cap & Pick-Up Tube

•  Heavy wall construction, safely operated at normal water system pressure
•  High Density Polyethylene (HDPE) is compatible w/ coolant liquids used in dentistry
•  Can be used on most Dental Systems (w/ the Universal Manifold 8134 or 8119)
•  Bottle dimensions:
• (750-ml, 3" W x 9 1/2" H)
• (1-liter, 3 1/2"W x 11" H)
• (2-liter, 4" W x 13 7/8" H)
•  Standard 28 mm threads
•  Washer now included!

PN 5948
Holder Valve, Auto HP, Normally Closed, Side Port

Holder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.

• Normally closed is used for 5940, 5960 and 4592 handpiece holders

PN 0014
1/4" Poly Q.D. w/ Shut-off, Male 1/4"

1/4" Poly Male Insert Q.D. w/ Shut-off

• 1/4" Q.D. w/ shut-off
• For use with water or air