PN 5823
Solids Collector Disposable Screen

Solids Collector Screen

• Collector Screen
• For use with DCI system 6000 and Reality units
• For use w/ 1500 series units
• Sirona / Siemens C2, C3, C4, C6
• Pelton & Crane™® S1 & S2

PN 7285
Air On/Off Indicator, Green

Replacement A-dec® Pneumatic Indicator, Green Panel Mount On / Off Indicator(A-dec® #24.0100.03)

• 10-32 Port with barbs for 1/8" and 1/16" I.D. tubing
• 25-120 PSI
• Panel-mount

PN 7133
Water Relay Combo Valve Repair Kit

Water Relay & Flow Control Combo Valves, Old Style, Repair kit for 7130 Valve

• Old Style, Repair kit for 7130 Valve
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 9188
Single Shut Off Valve Assembly & Filter, Water

Water Single Shut-Off Valve Assembly & Filter

• Water Single Shut-Off Valve Assembly & Filter
• For water
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 7247
Filter Element, 40 Micron

Filter Element, 40 Micron

• (A-dec® #24.0234.00)
• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7270
Rectangular Air Gauge

Replacement A-dec® Rectangular Pressure Gauge 0-60 PSI (A-dec® #026.083.01)

• 0-60 PSI reading
• For air only
• 1/2" H x 1-3/4" W
• Vibration & shock resistant

   

PN 2203
O-Ring, Buna-n, .114 I.D. X .070 Width, -006; Pkg of 12

O-Ring 11-006, Buna-n, .114 I.D. X .070 Width,

• Material - Buna-n
• I.D. x Cross Section - .114 x .070
• Package of 12
• (A-dec® #030.006.02)

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

PN 7321
HP Muffler and Oil Collector

HP Muffler and Oil Collector

• Can be mounted through frame for removal from outside control head
• Will handle up to four handpieces
• Minimum back pressure
• Compact size to fit inside control head
• Filter media is standard cotton swab material

PN 7087
Air Electric Switch, 25 PSI, Normally Closed

Air Electric Switch, 25 PSI, Normally Closed

• Activated at 10 PSI or 25 PSI
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

PN 7021
Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 9187
Single Shut Off Valve Assembly & Filter, Air

Single Air-Shut Off Valve Assembly 

• For air 
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 7156
Toggle Valve, Side Port, 3-Way, Gray

Toggle Valve, Side Port, 3-Way, On/Off, Gray

• Port barbs for 1/8" O.D. tubing
• Round body
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only
• (A-dec® #33.0048.04)

PN 7026
Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 7280
Air On/Off Indicator, Red

Replacement A-dec® Pneumatic Indicator, Red Panel Mount On / Off Indicator(A-dec® # 24.0100.03) 

• 10-32 Port with barb for 1/8" O.D. tubing
• 25-120 PSI
• Panel-mount

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 2225
O-Ring, Buna-n, .029 I.D. X .040 Width, -001; Pkg of 12

O-Ring, Buna-n, .029 I.D. X .040 Width, -001

• Material - Buna-n
• I.D. x Cross Section - .029 x .040
• Package of 12
• (A-dec® #030.001.00)

PN 4568
Holder, Standard, Molded, Gray

Standard Asepsis Holder, Gray

• Holder, Standard, Molded, Gray
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle
• Air operated actuator control

PN 8410
Storage Tub, Includes Hinge, Dividers, & Lid

Plastic Tub for Trays & Carts, Storage Well w/ Organizers

• Storage Tub, Includes Hinge, Dividers, & Lid
• Mounting surface is 4" x 22"
• (A-dec® #16.0562.00)

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5312

Cuspidor Screen, to fit A-dec ( R )

Cuspidor Bowls

• Cuspidor Screen
• Fits most manufacturer’s cuspidor bowls
• Stem 2 1/2" O.D. x 1 1/2" I.D.

A-dec®, Decade® and Century® are a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products..

PN 4425
Automatic HP Quad-Block

HP Quad-Block w/Std. Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 2210
O-Ring, Buna-n, .364 I.D. X .070 Width, -012; Pkg of 12

Piston O-Ring (pack of 12)

• O-Ring, Buna-n, .364 I.D. X .070 Width, -012
• Material - Buna-n
• I.D. x Cross Section - .364 x .070
• Package of 12

PN 2207
O-Ring, Buna-n, .426 I.D. X .070 Width, -013; Pkg of 12

Body O-Ring, Buna-n, .426 I.D. X .070 Width, -013

• Material - Buna-n
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 3090
Syringe Valve Cores; Pkg of 10

Syringe Valve Cores (A-dec® #026.033.00)

• Valve Core only
• Package of 10
• Fits Tri-Flow, Lever, Soft Touch Button & Continental® Syringe

A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 2242
O-Ring, Viton, .114 I.D. X .070 Width, -006; Pkg of 12

O-Ring, Viton, .114 I.D. X .070 Width, -006(A-dec® #035.048.00)

• Material - Viton
• I.D. x Cross Section - .114 x .070
• Package of 12

PN 6166
Marus Foot Control Rebuild Kit

Marus Foot Control Rebuild Kit (Marus #85R186)

• Kit includes: PN 6011 Large Spring, PN 6018 Piston, PN 2210 Piston O-Ring (pack of 12), PN 6012 Conical Spring, PN 2207 Body O-Ring (pack of 12), PN 9010 Poppet, PN 6016 Poppet Cap, PN 6013 Toggle Spring, PN 5948 Pilot Valve, PN 9746 6 x 1/2 Pan Head Phillips Screw, PN 6014 6-32 x 1/4 Pan Head Phillips Screw
• For Repairing Older Marus Style Foot Controls 
• 55R527, 55R531, 55R535 Foot Controls
• Marus OEM # 85R186 

PN 9010
Foot Control Poppet, Plastic; Pkg of 10

Foot Control Plastic Poppet (A-dec® #22.0060.00) (pkg of 10)

• (A-dec® #22.0060.00)
• Fits A-dec® foot control (#38.0050.00)
• Package of 10
• Prior to 1980

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 4427
Automatic HP Quin-Block

Quin-Block w/ Std. Adjustment Screws

• Works with normally automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Individual drive air adjustment screws
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quin-Block dimensions: 3 3/4" x 1 1/2" x 1"

PN 2229
O-Ring, Buna-n, .070 I.D. X .070 Width, -004; Pkg of 12

O-Ring, Buna-n, .070 I.D. X .070 Width

• Material - Buna-n
• I.D. x Cross Section - .070 x .070
• Package of 12
• For use in A-dec® Century® II Control Block
• (A-dec® #0030.004.02)

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® and Century® are a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 9134
Time Delay, Relay Assy

Time Delay, Relay Assy

• Works on Marus Max Star Cuspidor
• Controls length of time bowl or cup fill is activated
• 1/4" Poly Inlet & Outlet

PN 4426
HP Tri-block Mounting Bracket

Mounting Bracket

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water