All Replacement Parts by Marus in Pelton and Crane/Marus Control Blocks and Toggles

PN 7052
Needle Valve w/Knob, Gray

Needle Valve W/Knob, Gray

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut
• Includes 1/16" hex allen wrench

PN 7001
Toggle Routing Valve, 2-Way, Gray

Toggle Routing “Selector” Valve Hex Body, 2-Way, Gray

• Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
• Panel-mounting 15/32-32 thread with nut
• For air or water

PN 4430
HP Tri-Block Diaphragm

HP Tri-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 7016
Toggle Valve, On/Off, 3-Way, Gray

Toggle Valve Hex Body, On/Off, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 7012
Toggle Valve, On/Off, 2-Way, Gray

Toggle Valve On/Off Hex Body, 2-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 4433
HP Quad-Block Diaphragm

HP Quad-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

PN 7021
Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 7026
Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 4425
Automatic HP Quad-Block

HP Quad-Block w/Std. Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 4427
Automatic HP Quin-Block

Quin-Block w/ Std. Adjustment Screws

• Works with normally automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Individual drive air adjustment screws
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quin-Block dimensions: 3 3/4" x 1 1/2" x 1"

PN 4426
HP Tri-block Mounting Bracket

Mounting Bracket

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water