PN 8144
Economy Self-Contained Standard Water System w/2 Liter Bottle

Economy Self-Contained Standard Water System w/2 Liter Bottle

•  Deluxe models have a selector toggle allowing you to switch between city & bottled water
•  750 ml & 2 liter heavy duty bottles available
•  Standard 28mm thread water bottle
•  Gauge 7260 shows bottle pressure
•  Bracket mounts to any flat vertical surface
•  Optional post-mount available
•  On/off toggle releases bottle pressure

PN 4869
Holder, Auto HP, Molded, Normally Closed, Gray

Asepsis Holder, Gray, Normally Closed

• Lt. Gray, Normally Closed
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 7090
Shuttle Valve, 1/8"

Shuttle Valve, 1/8"

• For routing two different flows through one output
• For 1/8" tubing

PN 4566
Holder, Standard, Molded, White

Asepsis Holders

• Holder, Standard, Molded, White
• Asepsis Standard Holder
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8126
CAP BOTTLE w/ PS-22 SEAL 28mm x 19.0mm

CAP BOTTLE w/ PS-22 SEAL 28mm x 19.0mm• Heavy wall construction, safely operated at normal water system pressure • High Density Polyethylene (HDPE) is compatible w/ coolant liquids used in dentistry • Can be used on most Dental Systems (w/ the Universal Manifold 8134 or 8119) • Bottle dimensions: (750-ml, 3" W x 9 1/2" H)(1-liter, 3 1/2"W x 11" H)(2-liter, 4" W x 13 7/8" H) • Standard 28 mm threads • Washer now included!

PN 9188
Single Shut Off Valve Assembly & Filter, Water

Water Single Shut-Off Valve Assembly & Filter

• Water Single Shut-Off Valve Assembly & Filter
• For water
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 7133
Water Relay Combo Valve Repair Kit

Water Relay & Flow Control Combo Valves, Old Style, Repair kit for 7130 Valve

• Old Style, Repair kit for 7130 Valve
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 8684
DCI Equipment Light Bulb, 24 VAC 100 Watt

Replacement Bulbs

• 24 Volt AC / 100 Watt Bulb
• Fits DCI Equipment light/ Midmark 355 (002-0640-00)

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

PN 7321
HP Muffler and Oil Collector

HP Muffler and Oil Collector

• Can be mounted through frame for removal from outside control head
• Will handle up to four handpieces
• Minimum back pressure
• Compact size to fit inside control head
• Filter media is standard cotton swab material

PN 7247
Filter Element, 40 Micron

Filter Element, 40 Micron

• (A-dec® #24.0234.00)
• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

PN 7270
Rectangular Air Gauge

Replacement A-dec® Rectangular Pressure Gauge 0-60 PSI (A-dec® #026.083.01)

• 0-60 PSI reading
• For air only
• 1/2" H x 1-3/4" W
• Vibration & shock resistant

PN 0083
1/8" Barb Tee, Plastic; Pkg of 10

1/8" Barb Tee White Plastic

• For use with 1/4" O.D. tubing
• Package of 10

PN 0089
1/8" Uni-Clamp, 2-Piece; Pkg of 10

1/8" Uni-Clamp, 2-Piece

• For use with 1/8" O.D. tubing
• Package of 10

PN 5851
Cuspidor Drain Kit

Vacuum Drain Assembly Kit

• Cuspidor Drain Kit
• Select cuspidor drain kit
• Eliminates the need for conventional plumbing
• Allows installation where a gravity drain is not available or practical
• Includes flush toggle for remote operation

PN 8031
Lubricant, Parker Silicone, 2 oz

Lubricant, Parker Silicone, 2 oz

• Moisture resistant
• Silicone based lubricant
• For synthetic and rubber based O-rings

PN 7021
Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

Toggle Valve, Momentary, 2-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 2-way for air or water; 3-way for air only

PN 7260
Round Pressure Gauge, 0-160 PSI

Pressure Gauge 1 1/2" Face

• Rear Mounted Pressure Gauge
• 0-160 PSI pressure reading
• For air or water
• 1 1/2" diameter
• 1/8" MPT thread / 10-32 Female

PN 7100
Manual Shut-Off Valve, 1/2" FPT Inlet

Manual Shut-Off Valve, 1/2" FPT Inlet

• 1/2" nominal compression (7099)
• 1/2" FPT inlet (7100
• 3/8" O.D. tube compression fitting outlet

PN 6300
Foot Control, Standard, Gray Tubing

Standard Disc-Type

• Foot Control, Standard, Gray Tubing
• Foot Control without Signal Relay
• Responsive, high volume, variable flow
• 7' polyurethane 2-hole tubing (4-hole tubing w/ signal relay)

PN 9187
Single Shut Off Valve Assembly & Filter, Air

Single Air-Shut Off Valve Assembly 

• For air 
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 7156
Toggle Valve, Side Port, 3-Way, Gray

Toggle Valve, Side Port, 3-Way, On/Off, Gray

• Port barbs for 1/8" O.D. tubing
• Round body
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only
• (A-dec® #33.0048.04)

PN 0063
10-32 Connector Female; Pkg of 5

10-32 Connector Female

• Package of 5 

PN 4568
Holder, Standard, Molded, Gray

Standard Asepsis Holder, Gray

• Holder, Standard, Molded, Gray
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle
• Air operated actuator control

PN 0168
Duck Bill Barb

Duck Bill Barb

• Provides handpiece water line suck back control
• High flow rate is 80% of standard barb
• Barb has obvious appearance difference from standard
• Will fit any port where standard barb now used
• Can be used on handpiece or syringe water lines

PN 7054
Side Port Needle Valve

Side Port Needle Valve, Fine Adjustment

• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread with nut
• Includes 1/16" hex allen wrench

PN 8410
Storage Tub, Includes Hinge, Dividers, & Lid

Plastic Tub for Trays & Carts, Storage Well w/ Organizers

• Storage Tub, Includes Hinge, Dividers, & Lid
• Mounting surface is 4" x 22"
• (A-dec® #16.0562.00)

PN 3442
Syringe, Standard, Quick-Clean, w/Sterling Straight Tubing

Quick-Clean® Standard Syringe w/Sterling Straight Tubing

• Smooth contours for quick, thorough cleaning
• Quick-Change® tip disconnect
• Uses standard autoclavable tips or disposable tips
• Asepsis tubing standard
• Includes service kit when purchased w/ tubing

PN 7097
Pilot Actuated Relay Valve, Normally Closed

Pilot Actuated Relay Valve, Normally Closed

• Requires actuator #7096
• 10-32 ports
• 2-way (non-relieving)
• For air or water

PN 6322
Foot Control, Wet/Dry, Sterling Tubing

Foot Control, Wet/Dry, Sterling Tubing

• Foot Control w/o Signal Relay
• Responsive, high volume, variable flow
• Toggle for water coolant on/off
• 7' polyurethane 3-hole tubing

PN 0084
Kit 8-32 x 1/16" Barb/Washer (Pkg of 10)

8-32 x 1/16” Barb (pkg of 10)

• Used on most manufacturers’ syringes
• PN 0084 includes washer

PN 0952
1/16" Cross Connector, Metal

1/8" Cross Metal

• For use with 1/8" O.D. tubing
• Nickel plated

PN 4425
Automatic HP Quad-Block

HP Quad-Block w/Std. Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 5082
Vacuum Valves 1/2" Quick Disconnect Swivel

Economy Autoclavable Valves

• Replacement Quick-Disconnect Swivel for 1/2" Tubing
• Anodized aluminum body
• Quick disconnect – 360° swivel
• Smooth plastic lever action
• Includes brush for cleaning

PN 2210
O-Ring, Buna-n, .364 I.D. X .070 Width, -012; Pkg of 12

Piston O-Ring (pack of 12)

• O-Ring, Buna-n, .364 I.D. X .070 Width, -012
• Material - Buna-n
• I.D. x Cross Section - .364 x .070
• Package of 12

PN 7843
Toggle Cartridge Routing Valve, On/Off, Gray

Toggle Cartridge Routing Valve, On/Off, Gray

• On/Off
• Red cartridge body color
• Removable cartridge insert
• Will replace most OEM valves
• Color coded cartridge for easy identification
• Increased flow
• Quick and simple 60 degree turn to remove or insert

PN 7157
VALVE TOGGLE GRAY SIDE PORTED EXHAUSTING 2W MOM N.O.

Toggle Momentary Valve, Hex Body

• 3-Way Valve N.O
• Panel-mounting 15/32-32 thread w/ nut
• 2-way for air or water; 3-way for air only

PN 8335
Holder, 4-Position, Holds 2 HVE's by Base

Assistant’s Holders

• Holder, 4-Position, Holds 2 HVE's by Base
• Holds 2 HVE's by Base
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 4-position holder for syringe and vacuum valves

PN 9010
Foot Control Poppet, Plastic; Pkg of 10

Foot Control Plastic Poppet (A-dec® #22.0060.00) (pkg of 10)

• (A-dec® #22.0060.00)
• Fits A-dec® foot control (#38.0050.00)
• Package of 10
• Prior to 1980

PN 4427
Automatic HP Quin-Block

Quin-Block w/ Std. Adjustment Screws

• Works with normally automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Individual drive air adjustment screws
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quin-Block dimensions: 3 3/4" x 1 1/2" x 1"

PN 3479
Syringe, Valve Core, Quick-Clean, w/Gray Straight Tubing

Quick-Clean® Valve Core Style Syringe w/Gray Straight Tubing

• Smooth contours for quick, thorough cleaning and a sleek, contemporary look
• Quick-Change tip disconnect
• Uses standard autoclavable tips or disposable tips
• Asepsis tubing standard
• Includes service kit when purchased w/ tubing 

PN 8390
Utility Shelf, Post Mount, Gray

Utility Shelf Assembly, Gray

• 2" post or H-frame mount
• Pivots on mounting bracket for easy access
• Mounting bracket included
• Mounts using 1/2" pin
• Gray powder coat
• 12" x 12" surface area

PN 0059
3/8" Poly x 1/8" MPT Elbow

3/8" Poly x 1/8" MPT Elbow Fitting

PN 8327
Utility Center, Premium, Less Frame & Cover

Asepsis Utility Center

• Utility center less frame and cover
• Two manual shut-offs (7099)
• Accommodates up to 1 3/4" umbilicals
• Air and water regulators w/10-32 threads
• Mounts on floor or wall
• Cover dimensions are 14 1/2" x 14 3/4" x 5 1/16"
• One on/off toggle (7016) • Two pressure gauges (7260)
• One dual master valve (7135)

PN 7037
Push Button Momentary, 3-Way, Normally Closed, Gray

Push Button Momentary, 3-Way, Normally Closed, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only

PN 4868
Holder, Auto HP, Molded, Normally Open, Gray

Asepsis Holders

• Holder, Auto HP, Molded, Normally Open, Gray
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8253
Post Mount, 2", Gray

Post Mount Brackets

• 2" post mount
• For mounting folding and telescoping arm assemblies to 2" diameter post
• Accepts 1/2" O.D. pin
• Gray scratch resistant powder coat finish