PN 8312
Junction Box, Standard, Housing & Cover Only, Gray

Economy Utility Center

• Utility Center Housing Only, with Cover Gray
• Provides filtered, regulated air & water for assistant’s unit
• Mounts on floor or wall (plumbing template included)
• Accommodates up to 1 3/4" umbilicals
• Two integrated master shut-off valves w/ regulator & filter (7212)
• Two manual shut-off valves (7099) • 3-way on/off toggle valve (7016)
• Stainless steel housing 14" x 9" x 4 1/2"

PN 7260
Round Pressure Gauge, 0-160 PSI

Pressure Gauge 1 1/2" Face

• Rear Mounted Pressure Gauge
• 0-160 PSI pressure reading
• For air or water
• 1 1/2" diameter
• 1/8" MPT thread / 10-32 Female

PN 243
FC Tubing, 2 Hole, Poly Gray

FC Tubing, 2 Hole, Poly Gray

• Polyurethane
• Straight (priced per foot)

PN 332
Syringe Tubing, 3 Hole, Straight Gray

Syringe Tubing, 3 Hole, Straight Gray

• Straight (priced per foot)

PN 5751
Saliva Ejector Adapter

Saliva Ejector Adapter

• Tubing Adapter
• 7/16" O.D. x 7/32" barb
• Inserts into vacuum canister port or HVE valve

PN 0018
1/4" Q.D. Female x 1/8" MPT w/ Shut-off

Q.D. Female x MPT w/ Shut-off

• 1/4" Q.D. x 1/8" MPT

PN 5832
Solids Collector Covered Disposable Screen, 1 7/8"; Pkg of 100

Solids Collector Screens

• Covered disposable vacuum trap
• Covered Screen, 1 7/8" (pkg of 100)
• Available in 1 7/8" & 2 1/8"

PN 0076
1/8" Barb x 10-32 Female x 1/8" Barb Tee; Pkg of 5

1/8" Barb x 10-32 Port (pkg of 5)

PN 718
Vacuum Tubing, 1-1/2" I.D., Corrugated Sterling

Vacuum Tubing, 1-1/2" I.D., Corrugated Sterling

PN 7100
Manual Shut-Off Valve, 1/2" FPT Inlet

Manual Shut-Off Valve, 1/2" FPT Inlet

• 1/2" nominal compression (7099)
• 1/2" FPT inlet (7100
• 3/8" O.D. tube compression fitting outlet

PN 716
Vacuum Tubing, 1" I.D., Corrugated Sterling

Vacuum Tubing, 1" I.D., Corrugated Sterling

• Priced per foot 

PN 402
HP Tubing, 4 Hole, Straight Gray

HP Tubing, 4 Hole, Straight Gray

• Straight (priced per foot)

PN 7251
In-Line Filter, 10-32 Port

In-Line Filter, 10-32 Port

• 35 micron filtration
• 1" diameter by 1" long
• Air or water

PN 6315
Foot Control, Wet/Dry & Chip Blower, Gray Tubing

Foot Control, Wet/Dry & Chip Blower, Gray Tubing

Foot Control without Signal RelayResponsive, high volume, variable flowToggle for water coolant on/offToe-touch button valve for chip blower7' polyurethane 4-hole tubing

PN 8089
Sleeve Tool, Metal, 1/8" & 1/4"

Sleeve Tool, Metal, 1/8" & 1/4"

• Plated metal construction
• Ends angled 90 degrees

PN 7253
Filter Element Disc, Bronze; Pkg of 2

Bronze Filter Disc (pkg of 2)

• 35 micron filtration
• Air or water
• 1" diameter x 1" long

PN 5752
Saliva Ejector Tip Adapter

Saliva Tip Adapter

• Adapts to HVE valve
• Not autoclavable
• Connects 1/2" HVE tubing to 3/16" SE tubing

PN 232R
Syringe Tubing, 2 Hole, Asepsis Straight Gray; Roll of 100ft

Syringe Tubing, 2 Hole, Asepsis Straight Gray

• Priced per 100 foot roll

PN 7026
Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

Toggle Valve, Momentary, 3-Way, Normally Closed, Gray

• Panel-mounting 15/32-32 thread with nut
• 3-way for air only; 3-way for air only

PN 8145
Economy Self-Contained Standard Water System w/750 ml Bottle & Extra Bottle

Economy Self-Contained Standard Water System w/750 ml Bottle & Extra Bottle

• Deluxe models have a selector toggle allowing you to switch between city & bottled water
• 750-ml, 1-liter & 2-liter heavy duty bottles available
• Comes with Standard 28mm thread water bottle
• Gauge 7260 shows bottle pressure
• Bracket mounts to any flat vertical surface
• Optional post-mount available
• On/off toggle releases bottle pressure

PN 0073
10-32 Hex Plug; Pkg of 10

10-32 Hex Plug

• Includes washer
• Package of 10

PN 7022
Flow Restrictor

Flow Restrictor

• Variable control for air and water
• For 1/8" O.D. or 1/4" O.D. tubing

PN 432R
HP Tubing, 4 Hole, Asepsis Straight Gray; Roll of 100ft

HP Tubing, 4 Hole, Asepsis Straight Gray, 100 ft. Roll

PN 0061
1/4" Poly x 1/8" MPT Elbow

1/4" Poly x 1/8" MPT Elbow Fitting

PN 5720
Saliva Ejector w/out Valve Assembly

Saliva Ejector Tip

• Push-on autoclavable tip
• Without valve
• Removable clean out basket

PN 8067
O-Ring Kit

O-Ring Kit

• The kit contains 30 different O-rings in packages of 12 each, totaling 360 O-rings
• The O-rings come conveniently packaged in a 24 compartment plastic storage box
• Includes: 2207, 2210, 2215, 2223, 2228, 2235, 2236, 2237, 2238, 2239, 2240, 2241, 2243, 2245

PN 231
Syringe Tubing, 2 Hole, Asepsis Straight Black

Syringe Tubing, 2 Hole, Asepsis Straight Black

• Straight (priced per foot)

PN S611R
Saliva Ejector Tubing, 13/64" I.D., Vinyl Gray; Roll of 100ft

7/32" I.D. Vinyl Saliva Ejector Tubing., Vinyl Gray

• Priced per 100 foot roll

PN 0067
1/16" Barb x 1/8" MPT

1/16" Barb x 1/8" MPT Adapter

PN 9705
Hex Wrench Set, Standard

Hex Wrench Set, Standard

• Long arm series
• Ball driver end
• Heat treated alloy steel, black finish

PN 402T
HP Tubing, 4 Hole w/CT, Straight Gray

HP Tubing, 4 Hole w/CT, Straight Gray

• Straight 7 ft. with Connector

PN 7141
Check Valve w/Ball, 1/8" Barb

Check Valve w/Ball 1/8" Barb

• For use with non water retraction
• 1/16" or 1/8" barbs
• Allows flow in 1 direction only

PN 7069
Knob Only, Needle Valve, Gray

Knob Only, Needle Valve, Gray

• Flow Control Valve - "Hex Body"
• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread w/ nut
• Variable restriction for air & water
• Pinch valve
• Accommodates 1/8" or 1/4" O.D. tubing

PN 8010
Caster, Cart, Gray

Cart & Stool Casters

• Hard wheel for carpet, Gray

PN 8410
Storage Tub, Includes Hinge, Dividers, & Lid

Plastic Tub for Trays & Carts, Storage Well w/ Organizers

• Storage Tub, Includes Hinge, Dividers, & Lid
• Mounting surface is 4" x 22"
• (A-dec® #16.0562.00)

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5881
Holder Bar, 2", Gray

Holder Bar

• Holder Bar, Single 2"
• For use with 4592 and 5940 through 5970 holders
• Mounting hardware

PN 5884
Holder Bar, 8", Gray

Holder Bar

• Holder Bar, Quad 8"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 1407
Supply Tubing, 1/4", Poly Red

Supply Tubing, 1/4", Poly Red

• Polyurethane
• Priced per foot

PN 232C
Syringe Tubing, 2 Hole, Asepsis Coiled Gray

Syringe Tubing, 2 Hole, Asepsis Coiled Gray

• Coiled

PN 7113
BRACKET 2 POSITION ASSY 1/4 X 3/8

3/4" & 1/2" I.D. Toggle Mounting Bracket

• One 1/2" mounting hole for 1/4" Q.D.'s
• Q.D. Mounting Bracket, L: 3" H: 7/8" W: 3/4"
• One mounting hole for 3/8" Q.D's
• White powder coat finish

PN 1203R
Supply Tubing, 1/8", Poly Clear; Roll of 100ft

Supply Tubing, 1/8", Poly Clear

• Polyurethane
• Priced per 100 foot roll

PN 0084
Kit 8-32 x 1/16" Barb/Washer (Pkg of 10)

8-32 x 1/16” Barb (pkg of 10)

• Used on most manufacturers’ syringes
• PN 0084 includes washer

PN 432CT
HP Tubing, 4 Hole w/CT, Asepsis Coiled Gray

HP Tubing, 4 Hole w/CT, Asepsis Coiled Gray

• Coiled w/ Connector

PN 5312

Cuspidor Screen, to fit A-dec ( R )

Cuspidor Bowls

• Cuspidor Screen
• Fits most manufacturer’s cuspidor bowls
• Stem 2 1/2" O.D. x 1 1/2" I.D.

A-dec®, Decade® and Century® are a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products..

PN 7265
Round Pressure Gauge, Panel Mount, 0-100 PSI

Pressure Gauge 1 1/2" Face

• Panel Mount Pressure Gauge
• 0-100 PSI pressure reading
• Panel-mount bracket requires 1 5/8" hole
• 10-32 I.D. thread rear, 1/8" MPT thread
• 1 3/4" diameter
• For air or water

PN 1403R
Supply Tubing, 1/4", Poly Clear; Roll of 100ft

Supply Tubing, 1/4", Poly Clear

• Polyurethane
• Priced per 100 foot roll

PN 402CT
HP Tubing, 4 Hole w/CT, Coiled Gray

HP Tubing, 4 Hole w/CT, Coiled Gray

• Coiled with Connector

PN 5821
Vacuum Canister Plug Saliva Ejector Port

Vacuum Canister, Bracket Mounted

• Plug for Saliva Ejector Port
• Used w/ central vacuum system
• Solids collector w/ removable screen
• Accepts 2 HVE & 1 SE
• Hydrocolloid drain provision
• 1/2" O.D. drain
• Uses 1 7/8" screens 5818, 5820, 5832

PN 5910
Holder, Standard, Gray

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HP, SE, HVE with Tip

PN 1405R
Supply Tubing, 1/4", Poly Gray; Roll of 100ft

Supply Tubing, 1/4", Poly Gray

• Polyurethane
• Priced per 100 foot roll

PN 0068
1/8" Barb x 1/8" MPT

1/8" Barb x 1/8" MPT Adapter

PN 431T
HP Tubing, 4 Hole w/CT, Asepsis Straight Black

Asepsis 4-Hole Handpiece Tubing - Black - W/ Connector

• Straight 7 ft. with Connector

PN 1208R
Supply Tubing, 1/8", Poly Yellow; Roll of 100ft

Supply Tubing, 1/8", Poly Yellow

• Polyurethane
• Priced per 100 foot roll

PN 4425
Automatic HP Quad-Block

HP Quad-Block w/Std. Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 8322
Utility Center, Standard, Less Housing & Cover

Standard Utility Center

• Utility Center, Less Housing and Cover
• Mounts on floor or wall (plumbing template included)
• Slotted holes allow installation without disconnecting tubing
• Accommodates up to 1 3/4" umbilicals
• Two master shut-off valves w/ 1/2" MPT to 3/8" compression fittings (0904)
• Stainless steel housing 14"x 9"x 4 1/2"
• Two non-relieving regulators (7220)
• Two pressure gauges (7260)
• Two in-line filters (7250)
• Two manual shut-off valves (7099

PN 1404
Supply Tubing, 1/4", Poly Green

Supply Tubing, 1/4", Poly Green

• Polyurethane
• Priced per foot

PN 5929
Holder Bracket, Single, Gray

Holder Bracket

• Single Gray Plastic

• For use with 5900 through 5925 holders
• Durable plastic
• Mounting hardware Included

PN 3090
Syringe Valve Cores; Pkg of 10

Syringe Valve Cores (A-dec® #026.033.00)

• Valve Core only
• Package of 10
• Fits Tri-Flow, Lever, Soft Touch Button & Continental® Syringe

A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5817
Solids Collector Disposable Screen, 2 1/8"; Pkg of 100

Solids Collector Screen

• Disposable screen
• 2-1/8" diameter
• For use with 5872 & 5873 vacuum canister
• Blue
• Package of 100

PN 322
HP Tubing, 3 Hole, Asepsis Straight Gray

HP Tubing, 3 Hole, Asepsis Straight Gray

• Per foot

PN 0023
1/4" Poly Sleeve; Pkg of 10

1/4" Poly Sleeve "Ferrule"

• Package of 10

PN 5923
Holder, Vacuum, Gray

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HVE's

PN 4415
Panel Mount Automatic Control for 3 HP

Panel Mount Automatic Unit for 3 HP, White

• Individual drive air & water coolant controls
• Precision Comfort® Syringe
• Wet/Dry foot control
• Control dimensions: 8 1/2" x 1 3/4" x 5"
• Cut-out dimensions: 7 1/2" x 1 1/2"
• Horizontal system can be mounted to top or bottom of surface
• 4-Hole Straight Gray Tubing is Standard, with other tubing styles and colors available upon request

PN 8413
Storage Tub Hinge

Storage Well w/ Organizers

• Replacement Hinge
• Mounting surface is 4" x 22"

PN 5918
Holder, Syringe, Gray

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For Syringes

PN 5179
Vacuum Termination Plug

Vacuum Termination Plug

• Vacuum Termination Plug
• Autoclavable
• Fits autoclavable HVE or saliva ejector quick-disconnect
• Anodized aluminum

PN 3030
Syringe Tip Kit

Kit, Including Tip 3060

• For Syringe 3000
• For Syringe 3120
• For Syringe 3140
• For Syringe 3160
• Converts syringes with non-autoclavable tips
• Includes nut wrench
• Includes 5/32" hex key

PN 5882
Holder Bar, 4", Gray

Holder Bars

• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8470
Bushing, Light Post, 1-7/8 x 1-11/16

Pelton & Crane™ Light Bushing

• 1 7/8" O.D. x 1 11/16" I.D. for P&C, A-dec®, Marus™, Belmont, Knight L, Midmark, TPC lights
• Light Post Bushing

A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 4427
Automatic HP Quin-Block

Quin-Block w/ Std. Adjustment Screws

• Works with normally automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Individual drive air adjustment screws
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quin-Block dimensions: 3 3/4" x 1 1/2" x 1"

PN 5969
Holder, Electric Auto, Normally Closed, Gray

Electric Holders

• Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 5865
Vacuum Canister Vertical Mount Bracket, Gray

Vacuum Canister Vertical Mount Bracket, Gray

• Bracket, Vertical-Mount
• Used w/ central vacuum system
• Solids collector w/ removable screen
• Accepts 2 HVE & 1 SE
• Hydrocolloid drain provision
• 1/2" O.D. drain
• Uses 1 7/8" screens 5818, 5820, 5832

PN 3096
Valve Core Tool, Syringe

Valve Core Tool, Syringe

PN 4400
Panel Mount Manual Control for 2 HP

Panel Mount Manual Control for 2 HP, White

• Individual drive air & water coolant controls
• Precision Comfort® Syringe
• Economy foot control
• Control dimensions: 8 1/2" x 1 3/4" x 5"
• Cut-out dimensions: 7 1/2" x 1 1/2"
• Horizontal system can be mounted to top or bottom of surface
• 4-Hole Straight Gray tubing is Standard, with other tubing styles available upon request

PN 5883
Holder Bar, 6", Gray

Holder Bars

• Holder Bar, Triple 6"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8321
Utility Center, Standard w/Housing & Cover, Gray

Standard Utility Center

• Standard utility center with housing and cover, Gray
• Mounts on floor or wall (plumbing template included)
• Slotted holes allow installation without disconnecting tubing
• Accommodates up to 1 3/4" umbilicals
• Two master shut-off valves w/ 1/2" MPT to 3/8" compression fittings (0904)
• Stainless steel housing 14"x 9"x 4 1/2"
• Two non-relieving regulators (7220)
• Two pressure gauges (7260)
• Two in-line filters (7250)
• Two manual shut-off valves (7099

PN 8045
Cable Tie-Mount, Adjustable; Pkg of 10

Cable Tie-Mount, Adjustable

PN 243R
FC Tubing, 2 Hole, Poly Gray; Roll of 100ft

FC Tubing, 2 Hole, Poly Gray

• Polyurethane
• 100 ft. Roll

PN 1207R
Supply Tubing, 1/8", Poly Red; Roll of 100ft

Supply Tubing, 1/8", Poly Red

• Polyurethane
• Priced per 100 foot roll

PN 431CT
HP Tubing, 4 Hole w/CT, Asepsis Coiled Black

Asepsis 4-Hole Handpiece Tubing

• Black
• Coiled w/ Connector

PN 8058
Cable Tie, Adjustable, 8"; Pkg of 10

Cable Tie, Adjustable, 8"

• Package of 10 

PN 322T
HP Tubing, 3 Hole w/CT, Asepsis Straight Gray

HP Tubing, 3 Hole w/CT, Asepsis Straight Gray

• Straight 7 ft. with Connector

PN 231C
Syringe Tubing, 2 Hole, Asepsis Coiled Black

Syringe Tubing, 2 Hole, Asepsis Straight Black

• Coiled

PN 5963
Holder Replacement, Vacuum, Gray

Replacement Holder

• Vacuum Holder
• Replacement holders for bracket assemblies

PN 4198
Laboratory Handpiece Control Kit

Laboratory Handpiece Control Kit

• Requires air only
• 4-hole handpiece tubing
• Handpiece holder & bar
• Economy foot control
• Air regulator w/ gauge

PN 8054
Cable Tie, Adjustable, 4"; Pkg of 10

Cable Tie, Adjustable, 4"

• Package of 10 

PN 0085
WASHER 8-32 NYLON (PK 10)

Nylon Washer 8-32 (Pkg-10 ea)

• Used on most manufacturers’ syringes
• PN 0084 includes washer

PN 8471
Bushing, Light Post, 1-7/8 x 1-3/8

Light Post Accessories

• 1 Ritter Light Bushing
• 1 7/8" O.D. x 1 3/8" I.D. for Ritter K, Dental EZ, Proma, Daray, Faro, Forest lights

PN 1205R
Supply Tubing, 1/8", Poly Gray; Roll of 100ft

Supply Tubing, 1/8", Poly Gray

• Polyurethane
• Priced per 100 foot roll

PN 7075
Air Pilot Valve, 3-Way, Normally Closed

Air Pilot Valve, 3-Way, Normally Closed

• For air only
• Barb fitting for 1/8 O.D. tubing
• Air actuated on/off control
• Panel-mount 15/32-32 thread with nut
• Requires 25 PSI

PN 7223
Regulator Mounting Bracket w/ Nut

Mounting Bracket w/ Nut 

• 1/8 FPT ports
• Quick removal threaded bowl
• Self-relieving
• Filter with 5 micron element
• Corrosion resistant construction
• Diaphragm operated
• Must be mounted in vertical position
• Turn clockwise to increase pressure

PN 322R
HP Tubing, 3 Hole, Asepsis Straight Gray; Roll of 100ft

Asepsis 3-Hole Handpiece Tubing

• Gray
• 100 ft. Roll

PN 8466
Post Clamp, Butterfly, White

Light Post Extensions

• White Butterfly Clamp For 2" Light Post 
• Kit includes light post bushing, “Butterfly" clamp, 8' extension cord & post
• 24" or 30" post length
• Scratch resistant powder coat finish

PN 5967
Holder, Electric Auto, Normally Open, Gray

Electric Holders

• Normally Open
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• On/off lockout toggle, 5966-5969
• Automatic holder

PN 1404R
Supply Tubing, 1/4", Poly Green; Roll of 100ft

Supply Tubing, 1/4", Poly Green

• Polyurethane
• Priced per 100 foot roll

PN 5864
Vacuum Canister Horizontal Mount Bracket, Gray

Vacuum Canister Horizontal Mount Bracket, Gray

• Bracket, Horizontal-Mount
• Used w/ central vacuum system
• Solids collector w/ removable screen
• Accepts 2 HVE & 1 SE
• Hydrocolloid drain provision
• 1/2" O.D. drain
• Uses 1 7/8" screens 5818, 5820, 5832

PN 8400
Storage Well w/Organizers

Storage Well w/Organizers

• Well w/ Organizers
• Mounting surface is 4" x 22"
• White plastic tubs with dividers and hinged cover

PN 5885
Holder Bar, 14", Gray

Holder Bar

• Holder Bar, 14"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 3438
Syringe, Standard, Quick-Clean, w/Gray Coiled Tubing

Quick-Clean® Standard Syringe, w/Gray Coiled Tubing 

• Smooth contours for quick, thorough cleaning
• Quick-Change® tip disconnect
• Uses standard autoclavable tips or disposable tips
• Asepsis tubing standard
• Includes service kit when purchased w/ tubing

PN 242
FC Tubing, 2 Hole, Vinyl Gray

FC Tubing, 2 Hole, Vinyl Gray

• Vinyl
• Straight (priced per foot)

PN 9631
NYLINER 1/16 WALL THICKNESS

Reducing Bushing From 2" to 1 1/2"

• 1/16" Nyliner to expand to a 2" post

PN 426R
FC Tubing, 4 Hole, Poly Asepsis Gray; Roll of 100ft

FC Tubing, 4 Hole, Poly Asepsis Gray

• Polyurethane
• 100 ft. Roll

PN 5825
Vacuum Canister 2" Post Mount w/Gray Bracket, Anodized

Vacuum Canister Post Brackets

• Gray Bracket, Anodized

• For mounting vacuum canisters 5810 & 5860 on a 2" O.D. post
• Anodized with gray bracket 

PN 431R
HP Tubing, 4 Hole, Asepsis Straight Black; Roll of 100ft

Asepsis 4-Hole Handpiece Tubing

• Black
• 100 ft. Roll

PN 1201R
Supply Tubing, 1/8", Poly Black; Roll of 100ft

Supply Tubing, 1/8", Poly Black

• Polyurethane
• Priced per 100 foot roll

PN 8055
Cable Tie, Adjustable, 5"; Pkg of 10

Cable Tie, Adjustable, 5"

• Package of 10 

PN 8414
Storage Tub Lid

Storage Well w/ Organizers

• Mounting surface is 4" x 22"
• Lid

PN 231R
Syringe Tubing, 2 Hole, Asepsis Straight Black; Roll of 100ft

Syringe Tubing, 2 Hole, Asepsis Straight Black

• Priced per 100 foot roll

PN 8465
Post Clamp, Butterfly, Metal

Light Post Extensions

• Metal Butterfly Clamp For 2" Light Post
• Kit includes light post bushing, “Butterfly" clamp, 8' extension cord & post
• 24" or 30" post length
• Scratch resistant powder coat finish

PN 1407R
Supply Tubing, 1/4", Poly Red; Roll of 100ft

Supply Tubing, 1/4", Poly Red

• Polyurethane
• Priced per 100 foot roll

PN 343R
FC Tubing, 3 Hole, Poly Gray; Roll of 100ft

FC Tubing, 3 Hole, Poly Gray

• Polyurethane
• 100 ft. Roll

PN 5933
Holder Bracket, 3-Position, Aluminum

Holder Bracket

• 3-Position, Aluminum
• For use with 5900 through 5925 holders
• Durable precision milled aluminum
• Mounting hardware Included

PN 8001
Cart Frame, Standard H-Frame

H-Style Mobile Stand

• Stable "H" frame base
• Adjustable vertical height from 25" to 41"
• Satin chrome finish
• 2" diameter post with 3" x 3" mounting plate
• Twin wheel casters roll freely on carpet or hard flooring
• 20" W X 18" D

PN 322CT
HP Tubing, 3 Hole w/CT, Asepsis Coiled Gray

Asepsis 3-Hole Handpiece Tubing

• Coiled w/ Connector

PN 8664
Floor Flange, 1-5/8" I.D., Aluminum

Floor Flange, 1-5/8" I.D., Aluminum

• For 1-1/4" Vacuum Tubing - 3" O.D.
• Aluminum

PN 402R
HP Tubing, 4 Hole, Straight Gray; Roll of 100ft

HP Tubing, 4 Hole, Straight Gray

• 100 ft. Roll

PN 8179
Asepsis Self-Contained Standard Dual Water System w/2 Liter Bottle

Asepsis Self-Contained Standard Dual Water System w/2 Liter Bottle

• Deluxe models have a selector toggle allowing you to switch between city & bottled water
• Models for 750-ml & 2-liter bottles
• Standard 28mm thread or patented quick-switch system for water bottle
• Pressure gauge 7265
• Mounts to vertical surfaces
• Optional post-mount available
• On/off toggle releases bottle pressure
• Air purge toggle
• Metal cover w/ white powder coat finish

PN 242R
FC Tubing, 2 Hole, Vinyl Gray; Roll of 100ft

FC Tubing, 2 Hole, Vinyl Gray

• Vinyl
• 100 ft. Roll

PN 3437
Syringe, Standard, Quick-Clean, w/Black Straight Tubing

Quick-Clean® Standard Syringe, w/Black Straight Tubing 

• Smooth contours for quick, thorough cleaning
• Quick-Change® tip disconnect
• Uses standard autoclavable tips or disposable tips
• Asepsis tubing standard
• Includes service kit when purchased w/ tubing

PN 5934
Holder Bracket, 4-Position, Aluminum

Holder Bracket

• 4-Position, Aluminum
• For use with 5900 through 5925 holders
• Durable precision milled aluminum
• Mounting hardware Included

PN 8230
Rigid Arm, 12", Anodized

Rigid Arm, 12", Anodized

• 12" arm
• Mounts using 1/2" pin

PN 8475
Post Cap, 2" w/O-Ring, Stainless Steel

Light Post Accessories

• 2" Metal Post Cap
• Nylon Bushing fits 2" Posts
• 2" Diameter posts
• Post painted w/ a scratch resistant powder coat finish

PN 3436
Syringe, Standard, Quick-Clean, w/Black Coiled Tubing

Quick-Clean® Standard Syringe With Black Coiled Tubing

• Smooth contours for quick, thorough cleaning and a sleek, contemporary look
• Quick-Change tip disconnect
• Uses standard autoclavable tips or disposable tips
• Asepsis tubing standard
• Includes service kit

PN 8231
Rigid Arm, 16", Anodized

Folding Rigid Arm Sections

• 16" arm
• Mounts using 1/2" pin

PN 6305
Foot Control, Chip Blower, Gray Tubing

Foot Control, Chip Blower, Gray Tubing

• Foot Control without Signal Relay
• Responsive, high volume, variable flow
• Toe touch button valve for chip blower, (2-way, momentary)
• 7' polyurethane 3-hole tubing (5-hole tubing with signal relay)

PN 8454
Post, Light, 40" x 2" OD, Stainless Steel

Light Posts

• 40" x 2" OD, Metal
• 2" Diameter posts
• Post painted w/ a scratch resistant powder coat finish

PN 8663
Floor Flange, 1-3/8" I.D., Aluminum

Floor Flange, 1-3/8" I.D., Aluminum

• For 1" Vacuum Tubing - 3" O.D.
• Aluminum