PN 4433
HP Quad-Block Diaphragm

HP Quad-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 5823
Solids Collector Disposable Screen

Solids Collector Screen

• Collector Screen
• For use with DCI system 6000 and Reality units
• For use w/ 1500 series units
• Sirona / Siemens C2, C3, C4, C6
• Pelton & Crane™® S1 & S2

PN 4869
Holder, Auto HP, Molded, Normally Closed, Gray

Asepsis Holder, Gray, Normally Closed

• Lt. Gray, Normally Closed
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8126
CAP BOTTLE w/ PS-22 SEAL 28mm x 19.0mm

CAP BOTTLE w/ PS-22 SEAL 28mm x 19.0mm• Heavy wall construction, safely operated at normal water system pressure • High Density Polyethylene (HDPE) is compatible w/ coolant liquids used in dentistry • Can be used on most Dental Systems (w/ the Universal Manifold 8134 or 8119) • Bottle dimensions: (750-ml, 3" W x 9 1/2" H)(1-liter, 3 1/2"W x 11" H)(2-liter, 4" W x 13 7/8" H) • Standard 28 mm threads • Washer now included!

PN 7133
Water Relay Combo Valve Repair Kit

Water Relay & Flow Control Combo Valves, Old Style, Repair kit for 7130 Valve

• Old Style, Repair kit for 7130 Valve
• Non retraction type
• Combination pilot valve & needle valve
• 10-32 side ports
• Low Activation Pressure of 25 PSI
• Used on DCI Edge Series 4 and Series 5 units
• Precision Flow Control

PN 9188
Single Shut Off Valve Assembly & Filter, Water

Water Single Shut-Off Valve Assembly & Filter

• Water Single Shut-Off Valve Assembly & Filter
• For water
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 7248
Filter Element, 40 Micron; Pkg of 6

Filter Element, 40 Micron

• 1/8" FPT ports
• 40 micron replaceable element
• Kit Includes: housing, O-Rings, 40 micron filter element
• Package of 6

PN 7247
Filter Element, 40 Micron

Filter Element, 40 Micron

• (A-dec® #24.0234.00)
• Non-relieving regulator, piston type
• 150 PSI maximum for regulator
• 40 micron filter element
• Turn clockwise to increase pressure
• PN 7311 rebuild kit for PN 7212
• Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
• PN 7212 includes 10-32 x 1/8" barb & washer

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7270
Rectangular Air Gauge

Replacement A-dec® Rectangular Pressure Gauge 0-60 PSI (A-dec® #026.083.01)

• 0-60 PSI reading
• For air only
• 1/2" H x 1-3/4" W
• Vibration & shock resistant

   

PN 2203
O-Ring, Buna-n, .114 I.D. X .070 Width, -006; Pkg of 12

O-Ring 11-006, Buna-n, .114 I.D. X .070 Width,

• Material - Buna-n
• I.D. x Cross Section - .114 x .070
• Package of 12
• (A-dec® #030.006.02)

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

PN 7321
HP Muffler and Oil Collector

HP Muffler and Oil Collector

• Can be mounted through frame for removal from outside control head
• Will handle up to four handpieces
• Minimum back pressure
• Compact size to fit inside control head
• Filter media is standard cotton swab material

PN 9002
Pilot Valve Diaphragm, to fit A-dec( R ); Pkg of 10

Pilot Valve Diaphragm (1” square), to fit A-dec®; Pkg of 10 (A-dec® #22.0440.02)

• Used in coolant air & water valves, Auto Pac, air operated shutoff valves, black (water) & white (air) regulator valves. 
• Package of 10
• Kit Includes: stem, spring, diaphragm

A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 9093
Service Kit, to fit A-dec( R ) Water Valve, Black Body

Service Kit, to fit A-dec® Water Valve, Black BodyIncludes the following: Black Body 24.0355.00 9094 Plastic Piston Assy. 24.0132.00 9106 Conical Spring 013.032.00 9095 Gasket 9-Hole 24.0137.00 9004 Diaphragm 22.0440.00 9002 A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 9187
Single Shut Off Valve Assembly & Filter, Air

Single Air-Shut Off Valve Assembly 

• For air 
• 3/8" compression tube connection
• Includes 40 micron filter 

PN 7156
Toggle Valve, Side Port, 3-Way, Gray

Toggle Valve, Side Port, 3-Way, On/Off, Gray

• Port barbs for 1/8" O.D. tubing
• Round body
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only
• (A-dec® #33.0048.04)

PN 9004
9 Hole Gasket, to fit A-dec ( R ); Pkg of 10

9 Hole Gasket, to fit A-dec® (A-dec® #24.0137.01) (Pkg of 10)

• Fits black (water) & white (air) regulator assemblies
• Package of 10

A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 7069
Knob Only, Needle Valve, Gray

Knob Only, Needle Valve, Gray

• Flow Control Valve - "Hex Body"
• Fine flow control adjustment for air or water
• Panel-mounting 15/32-32 thread w/ nut
• Variable restriction for air & water
• Pinch valve
• Accommodates 1/8" or 1/4" O.D. tubing

PN 4568
Holder, Standard, Molded, Gray

Standard Asepsis Holder, Gray

• Holder, Standard, Molded, Gray
• Used for handpieces, syringes, saliva ejectors
• Used with vacuum valves with tip extension
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle
• Air operated actuator control

PN 7089
Air Electric Switch, 10 PSI, Normally Closed

Air Electric Switch, 10 PSI, Normally Closed (A-dec® #044.159.00) 

• Activated at 10 PSI or 25 PSI
• On/off control of up to 120V, 5 amp
• 15/32-32 thread with nut
• 125 PSI max

  Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 8410
Storage Tub, Includes Hinge, Dividers, & Lid

Plastic Tub for Trays & Carts, Storage Well w/ Organizers

• Storage Tub, Includes Hinge, Dividers, & Lid
• Mounting surface is 4" x 22"
• (A-dec® #16.0562.00)

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5312

Cuspidor Screen, to fit A-dec ( R )

Cuspidor Bowls

• Cuspidor Screen
• Fits most manufacturer’s cuspidor bowls
• Stem 2 1/2" O.D. x 1 1/2" I.D.

A-dec®, Decade® and Century® are a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products..

PN 4425
Automatic HP Quad-Block

HP Quad-Block w/Std. Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 2207
O-Ring, Buna-n, .426 I.D. X .070 Width, -013; Pkg of 12

Body O-Ring, Buna-n, .426 I.D. X .070 Width, -013

• Material - Buna-n
• I.D. x Cross Section - .426 x .070
• Package of 12

PN 9275
Time Delay Valve, Cuspidor Assy

Cuspidor/Cup Filler Time Delay Valve Assembly (P&C #043990)

• Controls length of time bowl or cup fill is activated
• 1/4" poly inlet & outlet

PN 4427
Automatic HP Quin-Block

Quin-Block w/ Std. Adjustment Screws

• Works with normally automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Individual drive air adjustment screws
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quin-Block dimensions: 3 3/4" x 1 1/2" x 1"

PN 7161
Rear Ported Valve, 3-Way, Gray

Toggle On/Off Rear Ported Valve, 3-Way, Gray

• Positive on/off control
• Panel-mounting 15/32-32 thread with nut
• 3-way for air only

PN 7169
Toggle Valve, Momentary, Rear Ported, 2-Way, Gray

Toggle Valve, Momentary On/Off, Rear Ported, 2-Way, Gray

• Rear ported valve
• 2-way valve for air or water
• Panel-mounting 15/32-32 thread with nut

PN 9095
Spring, Conical, .260/ .350 O.D., to fit A-dec( R ) Water Valve; Pkg of 10

Spring, Conical, .260/ .350 O.D., to fit A-dec® Water Valve; Pkg of 10

• Package of 10
• (A-dec® #13.032.00)

A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 6821
Solids Collector Disposable Screen Pelton & Crane Spirit ; Pkg of 144

Solids Collector Screens, Pelton & Crane® Spirit Line Solids Collector (pkg of 144) (P&C #9431388)

• For use w/ 1500 series units
• Sirona / Siemens C2, C3, C4, C6
• Pelton & Crane™® S1 & S2

PN 9094
Housing, to fit A-dec( R ) Water Valve, Black Body

Housing, to fit A-dec® Water Valve, Black Body Only (A-dec® #24.0355.00) A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.