All Replacement Parts by Marus in Regulators, Filters and Valves
57 Result Found
-
PN 7140
Check Valve w/Ball, 1/16" BarbCheck Valve w/Ball 1/16" Barb
- For use with non water retraction
- 1/16" barbs or 1/8" barbs
- Allows flow in 1 direction only
Price:
-
PN 5948
Holder Valve, Auto HP, Normally Closed, Side PortHolder Pilot Valve, Auto HP, Normally Closed, Side Port, 5 ea.
- Normally closed is used for 5940, 5960 and 4592 handpiece holders
Price:
-
PN 7052
Needle Valve w/Knob, GrayNeedle Valve W/Knob, Gray
- Fine flow control adjustment for air or water
- Panel-mounting 15/32-32 thread with nut
- Includes 1/16" hex allen wrench
Price:
-
PN 7001
Toggle Routing Valve, 2-Way, GrayToggle Routing “Selector” Valve Hex Body, 2-Way, Gray
- Toggle on/off for routing 1 input & 2 output, or 2 input & 1 output
- Panel-mounting 15/32-32 thread with nut
- For air or water
Price:
-
PN 7016
Toggle Valve, On/Off, 3-Way, GrayToggle Valve Hex Body, On/Off, 3-Way, Gray
- Positive on/off control
- Panel-mounting 15/32-32 thread with nut
- 3-way for air only; 3-way for air only
Price:
-
PN 7080
Air Electric Switch, 25 PSI, Normally OpenAir Electric Switch, 25 PSI, Normally Open (A-dec® #044.181.00)
- Activated at 25 PSI, 5 A
- On/off control of up to 120V, 5 amp
- 15/32-32 thread with nut
- 125 PSI max
Price:
-
PN 7212
Integrated Master Shut-Off Valve w/Regulator & FilterIntegrated Master Shut-Off Valve w/Regulator & FilterIntegrated Shut-Off Valve
- Non-relieving regulator, piston type
- 150 PSI maximum for regulator
- 40 micron filter element
- Turn clockwise to increase pressure
- PN 7311 rebuild kit for PN 7212
- Integrated 3/8" compression tube to adapt to 7100 & 7099 manual shut-off valve
- PN 7212 includes 10-32 x 1/8" barb & washer
Price:
-
PN 5983
Holder Valve, Auto HP, Normally Closed, Rear PortRear Port Micro Valve, Normally Closed
- Air operated actuator control
- Resists chemical discoloration
- Designed for 1/2" bar-mounting
- Adjustable tilt angle
Price:
-
PN 7070
Air Pilot Valve, 2-Way, Normally ClosedAir Pilot Valve, 2-Way, Normally Closed
- For air and water
- Barb fitting for 1/8 O.D. tubing
- Air actuated on/off control
- Panel-mount 15/32-32 thread with nut
- Requires 25 PSI
Price:
-
PN 7250
In-Line Filter, 1/8" FPTIn-Line Filter, 1/8" FPT
- 35 micron filtration
- 1" diameter by 1" long
- Air or water
Price:
-
PN 3021
Syringe Flow Control BlockSyringe Block
- For use on DCI 4102 & other manual handpiece control systems
- Includes all barb fittings
- Handpiece pressure adjustment
Price:
-
PN 7012
Toggle Valve, On/Off, 2-Way, GrayToggle Valve On/Off Hex Body, 2-Way, Gray
- Positive on/off control
- Panel-mounting 15/32-32 thread with nut
- 2-way for air or water; 3-way for air only
Price:
-
PN 7078
Valve Mounting Bracket, SingleValve Mounting Bracket, Single
- 1/2" I.D. mounting holes
- White powder coat finish
- Mounts toggles, indicators, Q.D.'s and air electric switches
- Single Mount, L: 1 1/2" H: 7/8" W: 3/4"
Price:
-
Shuttle Valve, 1/8"
- For routing two different flows through one output
- For 1/8" tubing
Price:
-
PN 7285
Air On/Off Indicator, GreenReplacement A-dec® Pneumatic Indicator, Green Panel Mount On / Off Indicator(A-dec® #24.0100.03)
- 10-32 Port with barbs for 1/8" and 1/16" I.D. tubing
- 25-120 PSI
- Panel-mount
Price: