PN 9833
Screw, Socket Cap Set, 10-32 x 1/2 Steel

Screw, Socket Cap Set, 10-32 x 1/2 Steel

PN 8303
Rigid Arm, 6", Gray

Folding Rigid Arm Sections

• 6" arm
• Mounts using 1/2" pin
• Gray scratch resistant powder coat finish

PN 8470
Bushing, Light Post, 1-7/8 x 1-11/16

Pelton & Crane™ Light Bushing

• 1 7/8" O.D. x 1 11/16" I.D. for P&C, A-dec®, Marus™, Belmont, Knight L, Midmark, TPC lights
• Light Post Bushing

A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 8244
Vacuum Canister Mount for Telescoping Arm

1/2" Pin Adapter & Vacuum Canister Mount for Telescoping Arm

• Vacuum Canister Mount
• Slides over a 1/2" bar
• Used to mount vacuum canisters

PN 4289
Pin Mount Bracket Kit, White

Surface Mount Brackets

• Under counter mount white

• For mounting folding & telescoping arms to horizontal surfaces
• Accepts 1/2" OD pin 
• Includes mounting inserts and instructions

PN 8397
Tray, Folding Rigid Arm Mounted, White

Folding Rigid Arm Mounted Tray

• Arm Mounted Tray
• Mounts to folding arms using 1/2" pin
• Stainless steel tray holder
• White powder coat finish

PN 4580
Holder, Assy, Handpiece, Aseptic Clip-on,White

Asepsis Clip-on Holders

• Holder, Assy, Handpiece, Normally Closed
• HP holder has air operated actuator

PN 5969
Holder, Electric Auto, Normally Closed, Gray

Electric Holders

• Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 8335
Holder, 4-Position, Holds 2 HVE's by Base

Assistant’s Holders

• Holder, 4-Position, Holds 2 HVE's by Base
• Holds 2 HVE's by Base
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 4-position holder for syringe and vacuum valves

PN 5930
Holder Bracket, Single, White

Holder Bracket

• Single, White
• For use with 5900 through 5925 holders
• Durable plastic
• Mounting hardware Included

PN 8476
Crush Bushing for Post Base, 2"

Light Post Accessories

• Crush Bushing for Base of Post
• Nylon Bushing fits 2" Posts

PN 4445
Holder Bar, Under Counter Swing Mount, White

Under Counter Holder Bar

• Cabinet-Mount Holder Bar
• For use with molded asepsis holders
• White powder coat
• Bar is 10-1/2" x 3-1/2"

PN 4585
Holder, Syringe, Aseptic Clip-on, White

Asepsis Clip-on Holders

• Holder, Syringe (SE or Extended HVE by the tip)
• HP holder has air operated actuator

PN 5883
Holder Bar, 6", Gray

Holder Bars

• Holder Bar, Triple 6"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8914
Post, Light, 60" x 2" OD, White

Light Posts

• 60" x 2" OD, White
• 2" Diameter posts
• Scratch resistant powder coat finish

PN 5827
Vacuum Canister 2" Post Mount w/Gray Bracket, White

Vacuum Canister Post Brackets

• For mounting vacuum canisters 5810 & 5860 on a 2" O.D. post
• Vacuum Canister Post Brackets
• Anodized or white powder coat

 

PN 8308
Vertical Mount, 1/2" Pin, Gray

Surface Mount Brackets

• For mounting folding and telescoping arms to flat vertical surfaces
• Mounting plate 4" x 4"
• Accepts 1/2" O.D. pin
• Gray scratch resistant powder coat finish

PN 8390
Utility Shelf, Post Mount, Gray

Utility Shelf Assembly, Gray

• 2" post or H-frame mount
• Pivots on mounting bracket for easy access
• Mounting bracket included
• Mounts using 1/2" pin
• Gray powder coat
• 12" x 12" surface area

PN 5950
Vacuum Holder Assy, Vacuum, Black

Universal Holder

• Vacuum Holder Assy, Vacuum, Black
• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting
• Adjustable tilt angle

PN 8618
Reducing Bushing, 2" to 1.7"; Pkg of 2

Reducing Bushing

• Reducing Bushing From 2" to 1.7"

PN 5925
Holder, Vacuum, White

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HVE's

PN 4563
Holder, Electric Auto, Molded, Normally Closed, White

Electric Holders

• Normally Closed
• On/off lockout toggle, 5966-5969
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• Automatic Holder

PN 5951
Holder Bar, 2", Black

Holder Bars

• Holder Bar, Single 2"
• For use with 4592 and 5940 through 5970 holders
• Mounting hardware
• Black holder bars are anodized

PN 8253
Post Mount, 2", Gray

Post Mount Brackets

• 2" post mount
• For mounting folding and telescoping arm assemblies to 2" diameter post
• Accepts 1/2" O.D. pin
• Gray scratch resistant powder coat finish

PN 4868
Holder, Auto HP, Molded, Normally Open, Gray

Asepsis Holders

• Holder, Auto HP, Molded, Normally Open, Gray
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8343
Holder Bar, Swing Mount, 3 Position

Swing Mount Holder Bar

• 3-Position Holder
• Mounts to vertical or horizontal surface
• 3- or 4-position holder for syringe & vacuum valves held by tip

PN 8185
Telescoping Arm w/3 Position Holder, White

Telescoping Breakaway Arm Systems

• Telescoping Arm w/3 Position Holder, White
• 24" to 46 3/4" horizontal reach
• 7 1/2" rigid arm
• Designed for mounting assistant's accessories
• Includes post-mount
• Use with 2" post-mount or wall-mount
• Breakaway feature protects equipment
• White powder coat

PN 8364
Holder, 4-Position, Holds SE & HVE by Tip

Assistant’s Holders

• Holder, 4-Position, Holds SE & HVE by Tip
• Holds 2 HVE's by Tip
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 4-position holder for syringe and vacuum valves

PN 5963
Holder Replacement, Vacuum, Gray

Replacement Holder

• Vacuum Holder
• Replacement holders for bracket assemblies

PN 4820
Monitor Support, Vertical Post Mounted, Gray

Flat Panel Monitor – Vertical Post Mounted Gray

• Monitor Only
• Utilizes 1/2" pin for use with folding rigid arms and mounts
• Fits either 75mm or 100mm VESA patterns
• Includes 2" vertical post mount
• Tilts up and down 30 degrees
• Monitor has quick adjustment knob
• Swivels left to right 55 degrees
• Gray powder coat

PN 8471
Bushing, Light Post, 1-7/8 x 1-3/8

Light Post Accessories

• 1 Ritter Light Bushing
• 1 7/8" O.D. x 1 3/8" I.D. for Ritter K, Dental EZ, Proma, Daray, Faro, Forest lights

PN 4582
Holder, Vacuum, Aseptic Clip-on White

Asepsis Clip-on Holders

• Holder, Vacuum, HVE (by the base)
• HP holder has air operated actuator

PN 4812
Mouse Tray Kit, Gray

Flat Panel Monitor – Vertical Post Mounted

• Mouse Tray Kit, Gray
• Utilizes 1/2" pin for use w/ folding rigid arms & mounts
• Fits either 75mm or 100mm VESA patterns
• Includes 2" vertical post mount
• Tilts up & down 30°
• Keyboard trays include 8" dual pivot arm
• Monitor & keyboard have quick adjustment knob
• Swivels left to right 55°
• Post not included

PN 8472
Extension Cord, Electrical, 8'

Light Post Accessories

• Power Cord (8')
• Nylon Bushing fits 2" Posts
• Used for light post extension kits

PN 8945
Post, Light, 40" x 2" OD, Gray

Light Posts

• 40" x 2" OD, Gray
• 2" Diameter posts
• Post painted with a scratch resistant powder coat finish

PN 5914
Holder, Auto HP, Molded, Normally Open, White w/Sterling Tubing

Asepsis Holders

• Holder, Auto HP, Molded, Normally Open, White w/Sterling Tubing
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8379
Horizontal Mount, 1/2", White

Surface Mount Brackets

• Horizontal mount
• For mounting folding and telescoping arms to flat horizontal surfaces
• Mounting plate 4" x 4"
• Accepts 1/2" O.D. pin
• White scratch resistant powder coat finish

PN 4579
Holder, Standard, Molded, 4% Gray

Asepsis Holders

• Holder, Standard, Molded, 4% Gray
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8647
Post Wall Mount for 8733 & 8734, White

2" Post Wall Mount

• Post Wall Mount for Flex Arm, White
• 6" x 6" mounting plate
• For use w/ current DCI flex arms
• Supports 60 lbs at 24" reach, when properly installed

PN 9797
Screw, Plastite Phillips Pan Head, 4 x 3/8 Zinc

Screw, Plastite Phillips Pan Head, 4 x 3/8 Zinc

PN 8449
Post, Light, 48" x 2" OD, White

Light Posts

• 48" x 2" OD, White
• 2" Diameter posts
• Post painted with a scratch resistant powder coat finish

PN 8241
Horseshoe Holder Bar w/Standard Holders, White

Horseshoe Assistant’s Holder Bar

• Bar and holders
• Includes three holders
• 1/2" O.D. pin

PN 4581
Holder, Assy, Handpiece, Aseptic Clip-on, Gray

Asepsis Clip-on Holders

• Holder, Assy, Handpiece, Normally Closed
• HP holder has air operated actuator

PN 4825
Keyboard Tray, Full, w/6" Arm, Vertical Post Mounted, Gray

Flat Panel Monitor – Vertical Post Mounted

• Keyboard Tray, Full, w/6" Arm, Vertical Post Mounted, Gray
• Full Keyboard Tray with 6" Arm
• Utilizes 1/2" pin for use with folding arms and mounts
• Includes 2" vertical post mount
• Swivels left to right 55 degrees
• Tilts up and down 30 degrees
• Gray powder coat
• Keyboards have a quick adjustment knob for tilting
• Support trays hold cameras, scalers, curing lights and other small devices

PN 8306
Rigid Arm, 12", Gray

Folding Rigid Arm Sections

• 12" arm
• Mounts using 1/2" pin
• Gray scratch resistant powder coat finish

PN 8408
Post Cap, 2" w/O-Ring, Gray

Light Post Accessories

• 2" Gray Light Post Cap
• Nylon Bushing fits 2" Posts
• 2" Diameter posts
• Post painted w/ a scratch resistant powder coat finish

PN 8466
Post Clamp, Butterfly, White

Light Post Extensions

• White Butterfly Clamp For 2" Light Post 
• Kit includes light post bushing, “Butterfly" clamp, 8' extension cord & post
• 24" or 30" post length
• Scratch resistant powder coat finish

PN 5967
Holder, Electric Auto, Normally Open, Gray

Electric Holders

• Normally Open
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• On/off lockout toggle, 5966-5969
• Automatic holder

PN 8400
Storage Well w/Organizers

Storage Well w/Organizers

• Well w/ Organizers
• Mounting surface is 4" x 22"
• White plastic tubs with dividers and hinged cover

PN 8730
Telescoping Arm w/4 Position Holder, Gray

Telescoping Breakaway Arm Systems

• Telescoping Arm w/4 Position Holder, Gray
• 24" to 46 3/4" horizontal reach
• 7 1/2" rigid arm
• Designed for mounting assistant's accessories
• Includes post-mount
• Use with 2" post-mount or wall-mount
• Breakaway feature protects equipment
• Gray powder coat

PN 8522
Chair Adapter, to fit A-dec( R ) Cascade( R ) 1040

Chair Adapters to fit:

• Chair Adapter to fit A-dec® Cascade® 1040

• Light gray powder coated finish

A-dec® and Cascade® are a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 5885
Holder Bar, 14", Gray

Holder Bar

• Holder Bar, 14"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8633
Holder Bar, 4 Position, Holds SE & HVE by Base

Assistant’s Holder Bars for Telescoping Arm

• Holder Bar, 4 Position, Holds SE & HVE by Base
• Holds SE and HVE by Base
• Mounts on end of 1/2" O.D. bar
• Holder for syringe and vacuum valves

PN 8332
Holder Bar, 4 Position, Holds SE & HVE by Tip

Assistant’s Holder Bars for Telescoping Arm

• Holder Bar, 4 Position, Holds SE & HVE by Tip
• Holds SE and HVE by Tip
• Mounts on end of 1/2" O.D. bar
• Holder for syringe and vacuum valves

PN 8006
Cart Frame, Small U-Frame

U-Style Mobile Stand

• Mobile Cart U-Frame
• Adjustable vertical height of 23" to 32"
• 15 degree angled upright
• Satin chrome finish
• 2" diameter with 3" x 3" mounting plate
• Twin wheel casters roll freely on carpet or hard flooring
• 18" W x 18" D

PN 5976
Holder, Electric Auto, Vacuum, Normally Closed, Gray

Electric Auto Holders

• HVE Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 8307
Rigid Arm, 16", Gray

Folding Rigid Arm Sections

• 16" arm
• Mounts using 1/2" pin
• Gray scratch resistant powder coat finish

PN 8478
Post, Light, 24" x 2" OD, Stainless Steel

Light Posts

• 24" x 2" OD, Metal
• 2" Diameter posts
• Post painted w/ a scratch resistant powder coat finish

PN 9224
Cart End Cap, Dome Shape, Gray

Cart Frame End Cap

• Designed for all carts
• Gray
• Semi-hemispherical shape

PN 8304
Rigid Arm, 8" Dual Pivot Arm, Gray

Folding Rigid Arm Sections

• 8" dual pivot arm
• Mounts using 1/2" pin
• Gray scratch resistant powder coat finish

PN 8913
Post, Light, 40" x 2" OD, White

Light Posts

• 40" x 2" OD, White
• 2" Diameter posts
• Post painted with a scratch resistant powder coat finish

PN 8474
Post Cap, 2" w/O-Ring, White

Light Post Accessories

• 2" White Post Cap
• Post painted w/ a scratch resistant powder coat finish
• Nylon Bushing fits 2" Posts

PN 4583
Holder, Vacuum, Aseptic Clip-on, Gray

Asepsis Clip-on Holders

• Holder, Vacuum, HVE (by the base)
• HP holder has air operated actuator

PN 8137
Adapter to Mount Water System to 2" Post, Anodized Aluminum

Adapter to Mount Water System to 2" Post, Anodized Aluminum

• Anodized aluminum 
• Optional post-mount adapter for self-contained water systems or accessories
• Adapts to 2" post

PN 5920
Holder, Syringe, Black

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For Syringes

PN 9631
NYLINER 1/16 WALL THICKNESS

Reducing Bushing From 2" to 1 1/2"

• 1/16" Nyliner to expand to a 2" post

PN 8500
Chair Adapter, to fit A-dec( R ) Decade( R ) 1020, 1021, 1221 & 1015

Chair Adapters to fit:

• Chair Adapter, to fit A-dec® Decade® 1020, 1021, 1221 & 1015

A-dec® and Decade® are a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 8949
Post, Light, 48" x 2" OD, Gray

Light Posts

• 48" x 2" OD, Gray
• 2" Diameter posts
• Post painted with a scratch resistant powder coat finish

PN 8398
Tray, Flex Arm Mounted, White

Flex Arm Mounted Trays, White

• For use with current DCI Flex Arms
• For use with flexible arm systems
• 1/2" holder bar, available in white powder coat finish
• Stainless steel tray holder 9  3/4" X 13  1/2"

PN 8429
Tray, Folding Rigid Arm Mounted, Gray

Folding Rigid Arm Mounted Tray, Gray

• Arm Mounted Tray
• Mounts to folding arms using 1/2" pin
• Stainless steel tray holder
• Gray powder coat finish

PN 8923
Top Post Mount Adapter Kit, White

Post Mount Flexible Arms

• Top Post Mount Adapter Kit, White

• Use w/ 8733 & 8734 post-mount flexible arm
• Easy conversion from thru post to top post mount
• Flexible counterbalanced arm w/ pneumatic brake
• 50" Over-the-Patient Style
• 34" Side Delivery Style
• Built in tension adjustment mechanism
• Vertical travel is 23"
• Rigid arm is 26" on the 50" arm, & 11" on the 34" arm
• Mounts on 2" diameter post or wall-mount brackets 8647 & 8349
• Easy conversion from thru post to top post mount

PN 4272
Tray Holder Bracket for 4370/4270

Bracket for Mounting Instruments to Alternative Control Heads

• Bracket for 4370 / 4270
• For mounting tray 4273 and control head to control arm
• White powder coat
• Retrofits to earlier models 4270 and 4274

PN 5825
Vacuum Canister 2" Post Mount w/Gray Bracket, Anodized

Vacuum Canister Post Brackets

• Gray Bracket, Anodized

• For mounting vacuum canisters 5810 & 5860 on a 2" O.D. post
• Anodized with gray bracket 

PN 5932
Holder Bracket, 2-Position, Aluminum

Holder Bracket

• 2-Position, Aluminum
• For use with 5900 through 5925 holders
• Durable precision milled aluminum
• Mounting hardware Included

PN 8002
Caster Insert, Cart

Cart & Stool Casters

• Cart Caster Insert

PN 8729
Telescoping Arm w/3 Position Holder, Gray

Telescoping Breakaway Arm Systems

• Telescoping Arm w/3 Position Holder, Gray
• 24" to 46 3/4" horizontal reach
• 7 1/2" rigid arm
• Designed for mounting assistant's accessories
• Includes post-mount
• Use with 2" post-mount or wall-mount
• Breakaway feature protects equipment
• Gray powder coat

PN 8634
Control Mount Bracket, Gray

Control Mount Bracket, Gray

• Mounting Bracket
• Use with folding rigid arms
• Mounts using 1/2" pin
• For DCI handpiece controls or assistant's instrumentation package 5430 and 5435
• Gray scratch resistant powder coat finish

PN 4273
Tray Holder, Plastic

Bracket for Mounting Instruments to Alternative Control Heads

• Instrument Tray Holder (Mounts to 4272 and 4274
• For mounting tray 4273 and control head to control arm
• White powder coat
• Retrofits to earlier models 4270 and 4020

PN 4276
Under Counter Unit Mount

Bracket for Mounting Instruments to Alternative Control Heads

• Under Counter Unit Mount
• For mounting tray 4273 & control head to control arm
• White powder coat
• Retrofits to earlier models 4270 & 4020