PN 5900
Holder, Standard, White

Economy Holders

• Mounts on holder brackets #5929-#5935
• Includes 10-32 mounting screw
• For HP, SE, HVE with Tip

PN 4564
Holder, Auto HP, Molded, Normally Open, White

Asepsis Holders

• Holder, Auto HP, Molded, Normally Open, White
• Normally Open
• Air operated actuator control.
• Resists chemical discoloration.
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 5923
Holder, Vacuum, Gray

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HVE's

PN 5880
Holder Bar, 10", Gray

Holder Bars

• Holder Bar, 10",  Gray
• For use w/ 4592 & 5940 through 5970 holders
• Mounting Hardware Included

PN 5954
Holder Bar, 8", Black

Holder Bar

• Holder Bar, Quad 8"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 8357
Rigid Arm, 16", White

Folding Rigid Arm Sections

• 16" arm
• Mounts using 1/2" pin
• White scratch resistant powder coat finish

PN 8413
Storage Tub Hinge

Storage Well w/ Organizers

• Replacement Hinge
• Mounting surface is 4" x 22"

PN 5912
Cavitron HP Sleeve Assy

Cavitron HP Sleeve Assy

• Adapts handpiece assembly to fit standard holders
• Molded plastic with set screw

PN 5918
Holder, Syringe, Gray

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For Syringes

PN 8338
Rigid Arm, 8", Dual Pivot Arm, White

Folding Rigid Arm Sections

• 8" dual pivot arm
• Mounts using 1/2" pin
• White scratch resistant powder coat finish

PN 8393
Utility Shelf, Post Mount, White

Utility Shelf Assembly, White

• 2" post or H-frame mount
• Pivots on mounting bracket for easy access
• Mounting bracket included
• Mounts using 1/2" pin
• White powder coat
• 12" x 12" surface area

PN 5998
Stem w/O-Rings for Auto HP Holder Valve, Normally Open

Stem w/O-Rings for Auto HP Holder Valve, Normally Open

PN 5915
Holder, Syringe, White

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For Syringes

PN 5882
Holder Bar, 4", Gray

Holder Bars

• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8493
Chair Adapter, Belmont, LSM, Westar

Chair Adapters to fit:Chair Adapter, Belmont, LSM, Westar

• Belmont Bed 20
• Westar 2001
• Westar 5000
• LSM DC-1000
• LSM COHO 
• White powder coated finish

PN 4586
Holder, Syringe, Aseptic Clip-on, Gray

Asepsis Clip-on Holders

• Holder, Syringe (SE or Extended HVE by the tip)
• HP holder has air operated actuator

PN 9833
Screw, Socket Cap Set, 10-32 x 1/2 Steel

Screw, Socket Cap Set, 10-32 x 1/2 Steel

PN 8303
Rigid Arm, 6", Gray

Folding Rigid Arm Sections

• 6" arm
• Mounts using 1/2" pin
• Gray scratch resistant powder coat finish

PN 8470
Bushing, Light Post, 1-7/8 x 1-11/16

Pelton & Crane™ Light Bushing

• 1 7/8" O.D. x 1 11/16" I.D. for P&C, A-dec®, Marus™, Belmont, Knight L, Midmark, TPC lights
• Light Post Bushing

A-dec® is a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 8244
Vacuum Canister Mount for Telescoping Arm

1/2" Pin Adapter & Vacuum Canister Mount for Telescoping Arm

• Vacuum Canister Mount
• Slides over a 1/2" bar
• Used to mount vacuum canisters

PN 4289
Pin Mount Bracket Kit, White

Surface Mount Brackets

• Under counter mount white

• For mounting folding & telescoping arms to horizontal surfaces
• Accepts 1/2" OD pin 
• Includes mounting inserts and instructions

PN 4580
Holder, Assy, Handpiece, Aseptic Clip-on,White

Asepsis Clip-on Holders

• Holder, Assy, Handpiece, Normally Closed
• HP holder has air operated actuator

PN 8397
Tray, Folding Rigid Arm Mounted, White

Folding Rigid Arm Mounted Tray

• Arm Mounted Tray
• Mounts to folding arms using 1/2" pin
• Stainless steel tray holder
• White powder coat finish

PN 5969
Holder, Electric Auto, Normally Closed, Gray

Electric Holders

• Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 8335
Holder, 4-Position, Holds 2 HVE's by Base

Assistant’s Holders

• Holder, 4-Position, Holds 2 HVE's by Base
• Holds 2 HVE's by Base
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 4-position holder for syringe and vacuum valves

PN 5930
Holder Bracket, Single, White

Holder Bracket

• Single, White
• For use with 5900 through 5925 holders
• Durable plastic
• Mounting hardware Included

PN 8476
Crush Bushing for Post Base, 2"

Light Post Accessories

• Crush Bushing for Base of Post
• Nylon Bushing fits 2" Posts

PN 4445
Holder Bar, Under Counter Swing Mount, White

Under Counter Holder Bar

• Cabinet-Mount Holder Bar
• For use with molded asepsis holders
• White powder coat
• Bar is 10-1/2" x 3-1/2"

PN 4585
Holder, Syringe, Aseptic Clip-on, White

Asepsis Clip-on Holders

• Holder, Syringe (SE or Extended HVE by the tip)
• HP holder has air operated actuator

PN 5883
Holder Bar, 6", Gray

Holder Bars

• Holder Bar, Triple 6"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Gray holder bars are painted

PN 8914
Post, Light, 60" x 2" OD, White

Light Posts

• 60" x 2" OD, White
• 2" Diameter posts
• Scratch resistant powder coat finish

PN 5827
Vacuum Canister 2" Post Mount w/Gray Bracket, White

Vacuum Canister Post Brackets

• For mounting vacuum canisters 5810 & 5860 on a 2" O.D. post
• Vacuum Canister Post Brackets
• Anodized or white powder coat

 

PN 8308
Vertical Mount, 1/2" Pin, Gray

Surface Mount Brackets

• For mounting folding and telescoping arms to flat vertical surfaces
• Mounting plate 4" x 4"
• Accepts 1/2" O.D. pin
• Gray scratch resistant powder coat finish

PN 8390
Utility Shelf, Post Mount, Gray

Utility Shelf Assembly, Gray

• 2" post or H-frame mount
• Pivots on mounting bracket for easy access
• Mounting bracket included
• Mounts using 1/2" pin
• Gray powder coat
• 12" x 12" surface area

PN 5950
Vacuum Holder Assy, Vacuum, Black

Universal Holder

• Vacuum Holder Assy, Vacuum, Black
• HVE Holder
• Holds vacuum valves from base
• For 1/2" bar-mounting
• Adjustable tilt angle

PN 8618
Reducing Bushing, 2" to 1.7"; Pkg of 2

Reducing Bushing

• Reducing Bushing From 2" to 1.7"

PN 5925
Holder, Vacuum, White

Economy Holders

• Mounts on holder brackets 5929 - 5935
• Includes 10-32 mounting screw
• For HVE's

PN 4563
Holder, Electric Auto, Molded, Normally Closed, White

Electric Holders

• Normally Closed
• On/off lockout toggle, 5966-5969
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• Automatic Holder

PN 5951
Holder Bar, 2", Black

Holder Bars

• Holder Bar, Single 2"
• For use with 4592 and 5940 through 5970 holders
• Mounting hardware
• Black holder bars are anodized

PN 4868
Holder, Auto HP, Molded, Normally Open, Gray

Asepsis Holders

• Holder, Auto HP, Molded, Normally Open, Gray
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8253
Post Mount, 2", Gray

Post Mount Brackets

• 2" post mount
• For mounting folding and telescoping arm assemblies to 2" diameter post
• Accepts 1/2" O.D. pin
• Gray scratch resistant powder coat finish

PN 8343
Holder Bar, Swing Mount, 3 Position

Swing Mount Holder Bar

• 3-Position Holder
• Mounts to vertical or horizontal surface
• 3- or 4-position holder for syringe & vacuum valves held by tip

PN 8185
Telescoping Arm w/3 Position Holder, White

Telescoping Breakaway Arm Systems

• Telescoping Arm w/3 Position Holder, White
• 24" to 46 3/4" horizontal reach
• 7 1/2" rigid arm
• Designed for mounting assistant's accessories
• Includes post-mount
• Use with 2" post-mount or wall-mount
• Breakaway feature protects equipment
• White powder coat

PN 8364
Holder, 4-Position, Holds SE & HVE by Tip

Assistant’s Holders

• Holder, 4-Position, Holds SE & HVE by Tip
• Holds 2 HVE's by Tip
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 4-position holder for syringe and vacuum valves

PN 5963
Holder Replacement, Vacuum, Gray

Replacement Holder

• Vacuum Holder
• Replacement holders for bracket assemblies

PN 8471
Bushing, Light Post, 1-7/8 x 1-3/8

Light Post Accessories

• 1 Ritter Light Bushing
• 1 7/8" O.D. x 1 3/8" I.D. for Ritter K, Dental EZ, Proma, Daray, Faro, Forest lights

PN 4820
Monitor Support, Vertical Post Mounted, Gray

Flat Panel Monitor – Vertical Post Mounted Gray

• Monitor Only
• Utilizes 1/2" pin for use with folding rigid arms and mounts
• Fits either 75mm or 100mm VESA patterns
• Includes 2" vertical post mount
• Tilts up and down 30 degrees
• Monitor has quick adjustment knob
• Swivels left to right 55 degrees
• Gray powder coat

PN 4582
Holder, Vacuum, Aseptic Clip-on White

Asepsis Clip-on Holders

• Holder, Vacuum, HVE (by the base)
• HP holder has air operated actuator

PN 4812
Mouse Tray Kit, Gray

Flat Panel Monitor – Vertical Post Mounted

• Mouse Tray Kit, Gray
• Utilizes 1/2" pin for use w/ folding rigid arms & mounts
• Fits either 75mm or 100mm VESA patterns
• Includes 2" vertical post mount
• Tilts up & down 30°
• Keyboard trays include 8" dual pivot arm
• Monitor & keyboard have quick adjustment knob
• Swivels left to right 55°
• Post not included

PN 8472
Extension Cord, Electrical, 8'

Light Post Accessories

• Power Cord (8')
• Nylon Bushing fits 2" Posts
• Used for light post extension kits

PN 5914
Holder, Auto HP, Molded, Normally Open, White w/Sterling Tubing

Asepsis Holders

• Holder, Auto HP, Molded, Normally Open, White w/Sterling Tubing
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8379
Horizontal Mount, 1/2", White

Surface Mount Brackets

• Horizontal mount
• For mounting folding and telescoping arms to flat horizontal surfaces
• Mounting plate 4" x 4"
• Accepts 1/2" O.D. pin
• White scratch resistant powder coat finish

PN 8945
Post, Light, 40" x 2" OD, Gray

Light Posts

• 40" x 2" OD, Gray
• 2" Diameter posts
• Post painted with a scratch resistant powder coat finish

PN 4579
Holder, Standard, Molded, 4% Gray

Asepsis Holders

• Holder, Standard, Molded, 4% Gray
• Automatic Handpiece Holders
• Air operated actuator control
• Resists chemical discoloration
• Designed for 1/2" bar-mounting
• Adjustable tilt angle

PN 8647
Post Wall Mount for 8733 & 8734, White

2" Post Wall Mount

• Post Wall Mount for Flex Arm, White
• 6" x 6" mounting plate
• For use w/ current DCI flex arms
• Supports 60 lbs at 24" reach, when properly installed

PN 9797
Screw, Plastite Phillips Pan Head, 4 x 3/8 Zinc

Screw, Plastite Phillips Pan Head, 4 x 3/8 Zinc

PN 8449
Post, Light, 48" x 2" OD, White

Light Posts

• 48" x 2" OD, White
• 2" Diameter posts
• Post painted with a scratch resistant powder coat finish

PN 4825
Keyboard Tray, Full, w/6" Arm, Vertical Post Mounted, Gray

Flat Panel Monitor – Vertical Post Mounted

• Keyboard Tray, Full, w/6" Arm, Vertical Post Mounted, Gray
• Full Keyboard Tray with 6" Arm
• Utilizes 1/2" pin for use with folding arms and mounts
• Includes 2" vertical post mount
• Swivels left to right 55 degrees
• Tilts up and down 30 degrees
• Gray powder coat
• Keyboards have a quick adjustment knob for tilting
• Support trays hold cameras, scalers, curing lights and other small devices

PN 8241
Horseshoe Holder Bar w/Standard Holders, White

Horseshoe Assistant’s Holder Bar

• Bar and holders
• Includes three holders
• 1/2" O.D. pin

PN 4581
Holder, Assy, Handpiece, Aseptic Clip-on, Gray

Asepsis Clip-on Holders

• Holder, Assy, Handpiece, Normally Closed
• HP holder has air operated actuator

PN 8306
Rigid Arm, 12", Gray

Folding Rigid Arm Sections

• 12" arm
• Mounts using 1/2" pin
• Gray scratch resistant powder coat finish

PN 8408
Post Cap, 2" w/O-Ring, Gray

Light Post Accessories

• 2" Gray Light Post Cap
• Nylon Bushing fits 2" Posts
• 2" Diameter posts
• Post painted w/ a scratch resistant powder coat finish

PN 8466
Post Clamp, Butterfly, White

Light Post Extensions

• White Butterfly Clamp For 2" Light Post 
• Kit includes light post bushing, “Butterfly" clamp, 8' extension cord & post
• 24" or 30" post length
• Scratch resistant powder coat finish