PN 8349
Post Wall Mount for Flex Arm, Gray

2" Post Wall Mount

• Wall Mount for Flex Arm, Gray
• 6" x 6" mounting plate
• For use w/ current DCI flex arms
• Supports 60 lbs at 24" reach, when properly installed

PN 5952
Holder Bar, 4", Black

Holder Bars

• Holder Bar, Dual 4"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 8051
Bar Holder Bracket w/Set Screws, White

Flex Arm Mounted Trays

• Bar Holder Bracket w/Set Screws, White
• Bar Holders Each
• For use with flexible arm systems
• 1/2" holder bar, available White powder coated finish

PN 8489
Post Top Mount, 2", White

Top Post Mount Brackets

• For mounting folding and telescoping arm assemblies
• Accepts 1/2" O.D. pin
• White scratch resistant powder coat finish
• Fits Radius® style and most vertical posts
• Fits 2" diameter post

Replaces 24V Volt/150 Watt bulbs in older 6300 lights A-dec® and Radius® are a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 8940
Post, Light, 30" x 2" OD, Gray

Light Posts

• 30" x 2" OD, Gray
• 2" Diameter posts
• Post painted with a scratch resistant powder coat finish

PN 7101
Electric Switch, Normally Open

Electric Switch, Normally Open

PN 8237
Telescoping Arm w/4 Position Holder, Anodized

Telescoping Breakaway Arm Systems

• Telescoping Arm w/4 Position Holder, Anodized
• 24" to 46 3/4" horizontal reach
• 7 1/2" rigid arm
• Designed for mounting assistant's accessories
• Includes post-mount
• Use with 2" post-mount or wall-mount
• Breakaway feature protects equipment

PN 8632
Holder Bar, 3 Position, Holds SE & HVE by Base

Assistant’s Holder Bars for Telescoping Arm

• Holder Bar, 3 Position, Holds SE & HVE by Base
• Holds SE and HVE by Base
• Mounts on end of 1/2" O.D. bar
• Holder for syringe and vacuum valves

PN 4274
Tray Holder Bracket for 4120/4121/4020

Bracket for Mounting Instruments to Alternative Control Heads

• Bracket for 4120 / 4020
• For mounting tray 4273 and control head to control arm
• White powder coat
• Retrofits to earlier models 4270 and 4020

PN 4763
Post, 30" White, w/Oilite Bushing

Post w/ Oilite Bushing for Top Post Mount

• 30" for Top Post Mount

• Fits DCI top post mount arms with adapter
• 1.5" Inner diameter

PN 8334
Holder, 3-Position, Holds SE & HVE by Tip

Assistant’s Holders

• Holder, 3-Position, Holds SE & HVE by Tip
• Holds HVE by Tip
• Mounts on 1/2" O.D. pin
• Mounting screw included
• 3-position holder for syringe and vacuum valves

PN 8305
Telescoping Arm Adapter, White

Telescoping Arm Adapter, White

• Mounts on the end of telescoping arm
• Accepts 1/2" O.D. pin
• White scratch resistant powder coat finish

PN 8430
Tray, Flex Arm Mounted, Gray

Flex Arm Mounted Trays, Gray

• For use with current DCI Flex Arms
• For use with flexible arm systems
• 1/2" holder bar, available in gray powder coat finish
• Stainless steel tray holder 9  3/4"  X  13  1/2"

PN 8463
Light Post Extension, 30", P&C Bushing, White

Light Post Extension, 30"

• Kit includes light post bushing, "Butterfly" clamp, 8' extension cord and post
• 30" post length with P&C bushing
• Scratch resistant powder coat finish

PN 8568
Chair Adapter, Pelton & Crane Coachman

Chair Adapter to fit

• Pelton & Crane™Coachman, Chairman 5000
• Light gray powder coated finish

PN 8969
Light Post Extension, 24", Pelton & Crane Bushing, Gray

Light Post Extension

• Kit includes light post bushing, "Butterfly" clamp, 8' extension cord and post
• 24"  post length with 8470 P&C bushing
• Scratch resistant powder coat finish

PN 5934
Holder Bracket, 4-Position, Aluminum

Holder Bracket

• 4-Position, Aluminum
• For use with 5900 through 5925 holders
• Durable precision milled aluminum
• Mounting hardware Included

PN 8411
Storage Tub Divider, Full

Storage Well w/ Organizers

• Storage Tub Divider, Full
• Mounting surface is 4" x 22"

PN 8986
Light Post Extension, 30", P&C Bushing, Gray

Light Post Extension

• Kit includes light post bushing, "Butterfly" clamp, 8' extension cord and post
• 30" post length with P&C bushing
• Scratch resistant powder coat finish

PN 8515
Chair Adapter, to fit A-dec Priority 1005 & 1010

Chair Adapter, to fit A-dec Priority 1005 & 1010

PN 8223
Telescoping Arm w/3 Position Holder, Anodized

Telescoping Breakaway Arm Systems

• Telescoping Arm w/3 Position Holder, Anodized
• 24" to 46 3/4" horizontal reach
• 7 1/2" rigid arm
• Designed for mounting assistant's accessories
• Includes post-mount
• Use with 2" post-mount or wall-mount
• Breakaway feature protects equipment

PN 8230
Rigid Arm, 12", Anodized

Rigid Arm, 12", Anodized

• 12" arm
• Mounts using 1/2" pin

PN 8538
Chair Adapter, to fit A-dec 500( R ) Series

Chair Adapters to fit:

• Chair Adapter, to fit A-dec 500® Series

A-dec® and A-dec 500® are a registered trademark of A-dec, Inc. DCI has no affiliation with A-dec and A-dec has not authorized DCI replacement parts to be used on or in connection with A-dec® products.

PN 8218
Post, Light, 30" x 2" OD, Stainless Steel

Light Posts

• 30" x 2" OD, Metal
• 2" Diameter posts
• Post painted w/ a scratch resistant powder coat finish

PN 8475
Post Cap, 2" w/O-Ring, Stainless Steel

Light Post Accessories

• 2" Metal Post Cap
• Nylon Bushing fits 2" Posts
• 2" Diameter posts
• Post painted w/ a scratch resistant powder coat finish

PN 4764
Post, 24" Gray, w/Oilite Bushing

Post w/ Oilite Bushing for Top Post Mount

• 24" for Top Post Mount
• Fits DCI top post mount arms with adapter
• 1.5" Inner diameter

PN 4906
DCI Flex Arm, Post Mount, 34 in White

DCI Flex Arm, Post Mount, 34 in White

PN 52161W
Assy, 4-Way Holder, Series 5, White

Assistant’s Holders for DCI Edge

• 4-Position Holder, Series 5

PN 8409
Post Clamp, Butterfly, Gray

Light Post Extensions

• Gray Butterfly Clamp For 2" Post
• Kit includes light post bushing, “Butterfly" clamp, 8' extension cord & post
• 24" or 30" post length
• Scratch resistant powder coat finish

PN 8431
Light Post Extension, 24", P&C Bushing, Stainless Steel

Light Post Extension, 24"

• Kit includes light post bushing, "Butterfly" clamp, 8" extension cord and post
• Scratch resistant powder coat finish
• 24" post length with P&C bushing

PN 5955
Holder Bar, 14", Black

Holder Bar,

• Holder Bar, 14"
• For use with 4592 and 5940 through 5970 holders
• Precision milled aluminum
• Mounting hardware
• Black holder bars are anodized

PN 8402
Horseshoe Holder Bar w/Standard Holders, Gray

Horseshoe Assistant’s Holder Bar

• Bar and holders
• Includes three holders
• 1/2" O.D. pin
• Gray powder coat 

PN 8506
Chair Adapter to fit DENTALEZ J13

Chair Adapters to fit:

• DentalEZ® J, PL200
• Chair adapters feature a scratch resistant light gray powder coat finish.

"DentalEZ" and "RAMVAC" are registered trademarks of DentalEZ, Inc., and RAMVAC Dental Products, Inc. which are not affiliated with DCI and do not endorse this product.  

PN 8309
Horizontal Mount, 1/2", Gray

Surface Mount Brackets

• Horizontal mount
• For mounting folding and telescoping arms to flat horizontal surfaces
• Mounting plate 4" x 4"
• Accepts 1/2" O.D. pin
• Gray scratch resistant powder coat finish

PN 8450
Post, Light, 60" x 2" OD, Stainless Steel

Light Posts

• 60" x 2" OD, Metal
• 2" Diameter posts
• Scratch resistant powder coat finish

PN 4765
Post, 30" Gray, w/Oilite Bushing

Post w/ Oilite Bushing for Top Post Mount

• 30" for Top Post Mount
• Fits DCI top post mount arms with adapter
• 1.5" Inner diameter

PN 4813
Keyboard Tray, Full, w/o Arm, Gray

Flat Panel Monitor – Vertical Post Mounted

• Keyboard Tray, Full, w/o Arm, Gray
• Full Keyboard Tray -Arm Required
• Utilizes 1/2" pin for use with folding arms and mounts
• Includes 2" vertical post mount
• Swivels left to right 55 degrees
• Tilts up and down 30 degrees
• Gray powder coat
• Keyboards have a quick adjustment knob for tilting
• Support trays hold cameras, scalers, curing lights and other small devices

PN 4907
DCI Flex Arm, Post Mount, 50 in Gray

DCI Flex Arm, Post Mount, 50 in Gray

PN 8922
Light Post Extension, 24", Ritter Bushing, White

Light Post Extension, 24"

• Kit includes light post bushing, "Butterfly" clamp, 8' extension cord and post
• 24"  post length with Ritter bushing
• Scratch resistant powder coat finish

PN 8242
Holder Bar, 3 Position, Holds SE & HVE by Tip

Assistant’s Holder Bars for Telescoping Arm

• Holder Bar, 3 Position, Holds SE & HVE by Tip
• Holds SE and HVE by Tip
• Mounts on end of 1/2" O.D. bar
• Holder for syringe and vacuum valves

PN 8407
Telescoping Arm Adapter, Gray

1/2" Pin Adapter & Vacuum Canister Mount for Telescoping Arm

• Adapter
• Powder Coat Adapter
• Mounts on the end of telescoping arm
• Accepts 1/2" O.D. pin

PN 8952
Post, Light, 60" x 2" OD, Gray

Light Posts

• 60" x 2" OD, Gray
• 2" Diameter posts
• Scratch resistant powder coat finish

PN 4855
Monitor Support & Full Size Keyboard Tray, w/Dual 8" Pivot Arm, Vertical Post Mounted, Gray

Monitor Support & Full Size Keyboard Tray, w/Dual 8" Pivot Arm, Vertical Post Mounted, Gray

• Monitor and Full Size Keyboard
• Utilizes 1/2" pin for use with folding rigid arms and mounts
• Fits either 75mm or 100mm VESA patterns
• Includes 2" vertical post mount
• Tilts up and down 30 degrees
• Keyboard trays include 8" dual pivot arm
• Monitor and keyboard have quick adjustment knob
• Swivels left to right 55 Degrees
• Gray powder coat

PN 8046
Holder Bar, U-Shaped, 16", White

Flex Arm Mounted Trays

• Holder Bar, U-Shaped, 16", White
• 16" Holder Bar U-Shaped
• For use with flexible arm systems
• 1/2" holder bar, available in White powder coated finish
• Stainless steel tray holder 9 3/4" X 13 1/2"

PN 8231
Rigid Arm, 16", Anodized

Folding Rigid Arm Sections

• 16" arm
• Mounts using 1/2" pin

PN 8454
Post, Light, 40" x 2" OD, Stainless Steel

Light Posts

• 40" x 2" OD, Metal
• 2" Diameter posts
• Post painted w/ a scratch resistant powder coat finish

PN 4955
Monitor Support & Full Size Keyboard Tray, w/Dual 8" Pivot Arm, Vertical Post Mounted, White

Flat Panel Monitor - Vertical Post Mounted - White

• Monitor and Full Size Keyboard
• Utilizes 1/2" pin for use with folding rigid arms and mounts
• Fits either 75mm or 100mm VESA patterns
• Includes 2" vertical post mount
• Tilts up and down 30 degrees
• Keyboard trays include 8" dual pivot arm
• Monitor and keyboard have quick adjustment knob
• Swivels left to right 55 degrees
• Gray powder coat

PN 8917
Chair Adaptor, Belmont Acutrac

Chair Adapters to fit:

• Chair Adapter - Belmont Acutrac
• Light gray powder coated finish

PN 8919
Chair Adapter to fit DentalEZ E2000 & Forest J

Chair Adapters to fit:

• DentalEZ® Advantage E2000
• Chair adapters feature a scratch resistant light gray powder coat finish.

"DentalEZ" and "RAMVAC" are registered trademarks of DentalEZ, Inc., and RAMVAC Dental Products, Inc. which are not affiliated with DCI and do not endorse this product.

PN 5966
Holder, Electric Auto, Normally Open, Black

Electric Holders

• Normally Open
• Holder assembly with low voltage switch for direct activation of electrical accessory
• 125 Volts AC / DC 5 amps
• On/off lockout toggle, 5966-5969
• Automatic holder

PN 5968
Holder, Electric Auto, Normally Closed, Black

Electric Holders

• Normally Closed
• Holder assembly with low voltage switch for direct activation of electrical accessory
• On/off lockout toggle
• 125 Volts AC / DC 5 amps
• Automatic holder

PN 8047
Holder Bar, U-Shaped, 16", Gray

Flex Arm Mounted Trays

• Holder Bar, U-Shaped, 16", Gray
• 16" Holder Bar U-Shaped
• For use with flexible arm systems
• 1/2" holder bar, available in Gray powder coated finish
• Stainless steel tray holder 9 3/4" X 13 1/2"

PN 8552
Chair Adapter to fit DentalEZ E3000

Chair Adapters to fit:

• DentalEZ 3000
• Light gray powder coated finish

"DentalEZ" and "RAMVAC" are registered trademarks of DentalEZ, Inc., and RAMVAC Dental Products, Inc. which are not affiliated with DCI and do not endorse this product.

PN 8464
Light Post Extension, 30", Ritter Bushing, White

Light Post Extension

• Kit includes light post bushing, "Butterfly" clamp, 8' extension cord and post
• 30" post length with Ritter bushing
• Scratch resistant powder coat finish

PN 4908
DCI Flex Arm, Post Mount, 34 in Gray

DCI Flex Arm, Post Mount, 34 in Gray

PN 8432
Light Post Extension, 24", Ritter Bushing, Stainless Steel

Light Post Extension, 24"

• Kit includes light post bushing, "Butterfly" clamp, 8" extension cord and post
• Scratch resistant powder coat finish
• 24" post length with Ritter bushing

PN 4924
Monitor Support, Top Post Mounted, White

Flat Panel Monitor – Top Post Mounted

• Monitor Only, White

PN 8052
Bar Holder Bracket w/Set Screws, Gray

Flex Arm Mounted Trays

• Bar Holder Bracket w/Set Screws, Gray
• Bar Holders Each
• For use with flexible arm systems
• 1/2" holder bar, available in Gray powder coated finish

PN 8920
Forest 6000, Forest 6200 Chair Adapter

Chair Adapters to fit:

• Chair Adapter Forest 6000 Assy
• Chair adapters feature a scratch resistant light gray powder coat finish

PN 8972
Light Post Extension, 24", Ritter Bushing, Gray

Light Post Extension, 24"

• Kit includes light post bushing, "Butterfly" clamp, 8' extension cord and post
• 24"  post length with Ritter bushing
• Scratch resistant powder coat finish

PN 8987
Light Post Extension, 30", Ritter Bushing, Gray

Light Post Extension

• Kit includes light post bushing, "Butterfly" clamp, 8' extension cord and post
• 30" post length with Ritter bushing
• Scratch resistant powder coat finish