PN 4430
HP Tri-Block Diaphragm

HP Tri-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 4433
HP Quad-Block Diaphragm

HP Quad-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 4421
Automatic HP Tri-Block

Tri-Block w/ Std. Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Tri-Block dimensions: 2 3/8" x 1 1/2" x 1"

PN 7321
HP Muffler and Oil Collector

HP Muffler and Oil Collector

• Can be mounted through frame for removal from outside control head
• Will handle up to four handpieces
• Minimum back pressure
• Compact size to fit inside control head
• Filter media is standard cotton swab material

PN 4438
Automatic HP Quad Block w/Long Adjustment Screws

HP Quad Block w/Long Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Twin-Block dimensions, 1 1/2" x 1 1/2" x 1"
• Tri-Block dimensions, 2 3/8" x 1 1/2" x 1"
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"
• Quin-Block dimensions, 3 3/4" x 1 1/2" x 1"

PN 4434
HP Quin-Block Diaphragm

HP Quin-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 4435
TRI-BLOCK AUTO W/LONG ADJUSTMENT SCREW

Tri-Block w/ Long Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Twin-Block dimensions, 1 1/2" x 1 1/2" x 1"
• Tri-Block dimensions, 2 3/8" x 1 1/2" x 1"
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"
• Quin-Block dimensions, 3 3/4" x 1 1/2" x 1"

PN 4425
Automatic HP Quad-Block

HP Quad-Block w/Std. Adjustment Screws

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 0949
Tubing HP Exhaust Muffler

Tubing HP Exhaust Muffler

PN 4427
Automatic HP Quin-Block

Quin-Block w/ Std. Adjustment Screws

• Works with normally automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Individual drive air adjustment screws
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quin-Block dimensions: 3 3/4" x 1 1/2" x 1"

PN 4381
HP Twin-Block Diaphragm

HP Twin-Block Diaphragm

• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water

PN 7281
Pressure Gauge, Round, 0-100 PSI

Pressure Gauge 1 1/2" Face

• Bottom Mounted Pressure Gauge
• 0-100 PSI pressure reading
• 1 1/2" diameter
• 1/8" MPT thread • For air or water

PN 4382
HP Twin-Block w/ Standard Adjustment Screws

HP Twin-Block w/ Standard Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Block dimensions: 1 1/2" x 1 1/2" x 1"

PN 4428
Automatic HP Quad-Block, Series 5

Quad-Block, Series 5, Knurled Adjustment Screws

• Works with normally closed automatic handpiece holders
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water
• Quad-Block dimensions, 3 1/8" x 1 1/2" x 1"

PN 4432
HP Block Drive Air Adjusting Screw

HP Drive Air Adjusting Screw

• Used on DCI Edge Series 4/5 Delivery Systems
• Works with normally closed automatic
• Consistent flow control for handpiece pressure adjustments
• Higher output due to improved airflow
• Longer lasting diaphragm
• No internal cross-over of air or water